一种低负载启动的智能RF遥控与触摸照明开关的设计

Design of Intelligent Low Log-on Load RF Remote Control and Touch Lighting Switch

智能照明控制技术的发展,使得智能照明控制器被大量应用。目前市场上的智能照明控制器大多数采用两线制连接,而不适应家庭单火线控制开关的替换。为了和传统传统机械式开关采用单火线控制的方式兼容,并特别考虑日益广泛的LED这类低负载小电流的控制电路的启动,提出一种单线制的改进方法,使智能照明控制器在4W负载下能够启动,并在安装连接时不需要改变线路。

With the development of intelligent lighting control technology, intelligent lighting controllers are used widely. Most of the intelligent lighting controllers in the market are using the two-wired connecting mode, making it unfit for household single-live-wire control switch. In order to be compatible with the traditional mechanical single-live-wire control switch, and specially considering the start up of those low-load and low-current control circuit such as LED, proposes an improved single wire method, makes the lighting controller start up under a 4W load, and no wires need to be changed when wiring.