期刊文献+

一种快速固化白色涂料的制备

The Preparation of Fast-curing White Coating
下载PDF
导出
摘要 本文制备出一种可快速固化的白色涂料,涂覆于聚酰亚胺(PI)薄膜上,应用于挠性印制电路板(FPC)的外层保护材料,即包封膜的方面,可以提高生产效率,降低生产成本。文章主要研究了涂料的固化工艺、热学性能及涂层的白度、光泽度、附着力、剥离强度、耐锡焊性等性能。实验结果表明,涂料具有固化速度快、附着力强、柔韧性好、耐热性能优越等特点,满足FPC包封膜生产需求。 In this paper, a fast - curing white coating was prepared. It can improve the production efficiency and reduce production costs as this coating coated on PI film, applied to the production process of FPC encapsulation film . In this paper, the coating curing process, thermal properties , whiteness and gloss, adhesion, peel strength, resistance to soldering and other properties were studied. The results showed that, the coating had the characteristics of fast curing speed , strong adhesion, good flexibility and excellent heat resistance, meeting the demand of FFC encapsulation film production.
出处 《山东化工》 CAS 2015年第9期33-36,共4页 Shandong Chemical Industry
关键词 包封膜 快速固化 白色涂料 encapsulation film fast - curing white coating
  • 引文网络
  • 相关文献

参考文献5

  • 1范和平,李桢林.一种挠性印制电路板包封膜用中温固化环氧胶粘剂及其制备方法:中国,101845287[P].2010-05-10.
  • 2鲍利军,吴国元.TiO_2的表面改性[J].云南冶金,2003,32(5):35-38. 被引量:8
  • 3芦成,张卫勤,黄锐,施民康,廖小燕,赵亮.偶联剂表面处理对钛白粉及其色母粒性能的影响[J].塑料工业,2009,37(8):66-69. 被引量:10
  • 4Desor. Aqueous polymer dispersions as binders for elastic, non- blocking and scratch- resistant coatings :UP,6005042 [P]. 1999 - 12 -21.
  • 5张雪平,李桢林,范和平,等.白色包封膜用热固涂料的性能研究[c].第十三届覆铜板技术交流会论文集,2012:135-138.

二级参考文献18

共引文献15

;
使用帮助 返回顶部