期刊文献+

于法向量夹角信息熵的点云简化算法 被引量:36

Point Cloud Simplification Based on the Information Entropy of Normal Vector Angle
原文传递
导出
摘要 针对点云简化很难完全保证精度和速度上达到最优的问题,提出了基于法向量夹角信息熵的点云简化算法。利用经典的主成分分析方法来估计点的法向量,计算法向量与参考平面的夹角,利用最邻近点搜索算法,确定每个点的K个最邻近点,并根据信息熵的定义,提出法向量夹角局部熵模型,局部熵的大小直接反映了表面的特征状况;针对不同区域局部熵大小,进行逐步的点云简化,从而可以保留凸变区域较多的点,精简较多平面区域的点,实现点云的非均匀简化。实验结果表明,该方法在简化精度和速度上都能达到较优。 A point cloud simplification based on the information entropy of normal vector angle is proposed, in view of the difficulty to ensure the optimal of precision and speed of simplification. The principal component analysis is used to estimate the normal of each point and the angle between normal vector and reference plane is computed. The K-nearest neighbor search algorithm is used to determine K-nearest neighbor points, and the local entropy of normal vector angle is proposed according to information entropy. The local entropy represents the features of surface. The point cloud is gradually simplified according to the different local entropy, the more points of convex region are retained and more points of plane are simplified, the non-uniform simplification is realized.The experimental results show that the proposed method can achieve a balance of precision and speed of simplification.
出处 《中国激光》 EI CAS CSCD 北大核心 2015年第8期328-336,共9页 Chinese Journal of Lasers
基金 长江水利委员会长江科学院开放基金(CKWV2015230/KY) 博士点专项基金(20120143110005)
关键词 遥感 误差熵 点云简化 法向量 remote sensing error entropy point cloud simplification normal vector
  • 相关文献

参考文献17

  • 1孙肖霞,孙殿柱,李延瑞,范志先.反求工程中测量数据的精简算法[J].机械设计与制造,2006(8):37-38. 被引量:12
  • 2Hur S M,Kim H C,Lee S H.STL file generation with data reduction by the delaunay triangulation method in reverse engineering[J].The International Journal of Advanced Manufacturing Technology,2002,19(9):669-678.
  • 3Lichti D D,Gordon S J.Error propagation in directly georeferenced terrestrial laser scanner point clouds for cultural heritage recording[J].Proc.of FIG Working Week,Athens,Greece,May,2004:22-27.
  • 4Taichi O.Modern survey of large bridge and tunnel project for their construction control[C].FIG Working Week,Athens,Greece.WSA3 Modeling and Visualization,2004:22-27.
  • 5郑德华.点云数据直接缩减方法及缩减效果研究[J].测绘工程,2006,15(4):27-30. 被引量:24
  • 6黄国珍,卢章平.面向逆向工程的点云数据精简方法[J].机械设计与研究,2005,21(3):59-61. 被引量:17
  • 7Sihvo T,Niittylahti J.A low cost solution for 2D memory access[C].Circuits and Systems,IEEE International Midwest Symposium on.IEEE,2006,2:123-127.
  • 8Wentzlaff D,Griffin P.On-chip interconnection architecture of the tile processor[J].IEEE Micro,2007,27(5):15-31.
  • 9Sareen K K,Knopf G K,Canas R.Contour-based 3D point cloud simplification for modeling freeform surfaces[C].Science and Technology for Humanity (TIC-STH),2009 IEEE Toronto International Conference,2009:381-386.
  • 10张有亮,刘建永,付成群,郭杰.新的点云数据精简存储方法[J].计算机应用,2011,31(5):1255-1257. 被引量:7

二级参考文献48

共引文献78

同被引文献236

引证文献36

二级引证文献264

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部