期刊文献+

聚乙烯醇-魔芋葡甘聚糖包装膜透光率与雾度 被引量:8

Light Transmittance and Haze of Poly(Vinyl Alcohol)-Konjac Glucomannan Packaging Film
下载PDF
导出
摘要 目的研究影响聚乙烯醇-魔芋葡甘聚糖包装膜透光率和雾度的因素。方法以甘油、山梨醇为复配增塑剂,将纯化过的魔芋精粉和聚乙烯醇按一定质量比混合后水浴恒温共混,流延干燥制备包装膜,研究共混温度、共混时间、基料配比、复配增塑剂配比对包装膜透光率和雾度的影响。结果魔芋精粉和聚乙烯醇按质量比为1∶10混合,在水浴温度80℃下恒温共混3 h,加入质量分数为10%的复配增塑剂,复配增塑剂中山梨醇和甘油的质量比控制在1∶2~1∶3时制备的包装膜透光率和雾度达到最佳。结论各因素对包装膜的透光率和雾度有较大影响,原因是它们能促使魔芋葡甘聚糖分子和聚乙烯醇分子形成强烈的协同作用。 It aims to study the factors that influence the light transmittance and haze of poly(vinyl alcohol)-konjac glucomannan packaging film. With glycerol and sorbitol as compound plasticizer, purified konjac powder and poly(vinyl alcohol) were blended by water bath at constant temperature based on certain mass ratio, and then stretched and dr ied to prepare the packaging film. Effect of blending temperature, blending time, basic material proportioning and mixed ratio of plasticizer on the light transmittance and haze of the packaging film was studied. Purified konjac powder and PVA were mixed in accordance with the mass ratio of 1∶10, and blended by water bath at 80 ℃ for 3 h. Then 10% mixed plasticizer was added. When the mass ratio of sorbitol and glycerol in t he plasticizer was controlled at 1∶2~1∶3, the light transmittance and haze of the packaging film was the best. In conclusion, various factors have a great influence on light transmittance and haze of packaging film, because that they can help konjac glucomannan molecules and polyvinyl alc ohol molecules form strong synergy.
出处 《包装工程》 CAS CSCD 北大核心 2016年第15期84-88,共5页 Packaging Engineering
基金 中山市科技发展专项资金及科学事业费项目(2014A2FC240)
关键词 聚乙烯醇 魔芋葡甘聚糖 透光率 雾度 poly(vinyl alcohol) konjac glucomannan light transmittance haze
  • 相关文献

参考文献16

二级参考文献202

共引文献123

同被引文献71

引证文献8

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部