期刊文献+

一种大型薄壁碟形封头成形工艺优化 被引量:1

Optimization of forming process for one kind of large thin-wall dished head
下载PDF
导出
摘要 本文针对在实际生产大型薄壁碟形封头中遇到的成形缺陷问题,提出一种新的模具拉延筋设计方案,并利用非线性有限元软件Dynaform,采用大变形弹塑性有限元模型对06Cr19Ni10覬2380mm×5.6mm碟形封头进行了模拟计算,仿真结果表明了该模具拉延筋设计方案的有效性与实用性。 Aiming at the forming defects during actual forming process of large thin-wall dished head,thenew kind of die draw bead design has been put forward in the text. By use of nonlinear finite element software Dynaform and large deformation elastic-plastic finite element model, simulated calculation has been conducted to the φ2380mm×5.6mm dished head, which is made from 06Crl9Ni10. The simulation results show the effectiveness and practicability of the die draw bead design.
出处 《锻压装备与制造技术》 2017年第2期62-65,共4页 China Metalforming Equipment & Manufacturing Technology
关键词 碟形封头 拉延筋 数值分析 DYNAFORM Dished head Drawbead Numerical analysis Dynaform
  • 引文网络
  • 相关文献

参考文献3

二级参考文献21

  • 1朱向哲,谢禹钧,王晓华.半球形厚壁封头冲压成形有限元分析及优化[J].辽宁石油化工大学学报,2004,24(4):51-53. 被引量:14
  • 2李硕本.汽车零件冲压成形文集[M].哈尔滨工业大学出版社,1986.1-9.
  • 3金淼.板料成形中拉深筋的力学性能及影响因素研究:工学博学位论文[M].秦皇岛:燕山大学,2000..
  • 4Kirby D S,Wild P M. Deep drawing of pressure vessel endclosures : finite element simulation and validation [J]. Journalof Materials Processing Technology, 2000,103(2) : 247-260.
  • 5Hillmann M, Kubli W . Optimization of sheet metal formingprocesses using simulation programs[R]. Numisheet 99,FranceBesancon, 1999:287-292.
  • 6Chakrabarty J. Theory of stretch forming over hem- ispherieal punch heads[J].International Journal of Mechanical Sciences. 1970, 12 (4): 315-325.
  • 7Chao Y J, Sutton M A. Stress concentration factors for nozzles in ellipsoidal pressure vessel heads due to thrust Ioads[J].International Journal of Pressure Vessels and Piping, 1985, 19(1): 69-81.
  • 8Fiorentino A, Ceretti E, Attanasio A, et al. Analy- sis of forces, accuracy and formahility in positive die sheet incremental forming[J]. International Journal of Material Forming, 2009, 2(1) : 805-808.
  • 9Durante M, Formisano A, Langella A, et al. The influence of tool rotation on an incremental forming process[J]. Journal of Materials Processing Tech nology, 2009, 209(9): 4621-4626.
  • 10ZhangJ H, Zhan M, Yang H, et al. 3D-FE model- ing for power spinning of large ellipsoidal heads with variable thicknesses[J]. Computational Materials Science, 2011, 53(1): 303-313.

共引文献15

同被引文献10

引证文献1

二级引证文献4

;
使用帮助 返回顶部