期刊文献+

基于呋喃二甲酸的新型生物基增塑剂的制备及其增塑效果研究 被引量:2

Preparation and Plasticizing Effect of Novel Bio-base Plasticizers Based on Furanedicarboxylic Acid
下载PDF
导出
摘要 以2,5呋喃二甲酸为基体分别与反式2己烯醇、正己醇反应,制备出不同分子结构的生物基增塑剂。通过冲击、拉伸测试并结合动态力学分析考察增塑剂分子结构及添加量对聚氯乙烯(PVC)力学性能的影响;采用毛细管流变仪考察增塑剂分子结构及添加量对PVC熔体流动性的影响。结果表明,2种新型生物基增塑剂均能提高PVC材料的冲击强度,且2,5呋喃二甲酸二正己酯(DNHFDC)增塑效果优于2,5呋喃二甲酸二(反式2己烯)酯(DT2HFDC);当添加量为10份(质量份,下同)时,以DNHFDC为增塑剂的PVC材料比添加等量DOP时的冲击强度提高了0.28 kJ/m^2,拉伸强度降低了4.2 MPa。 A series of bio-base plasticizers with different molecular structures were prepared by the reaction of 2,5-furan-dicarboxylic acid with trans-2-hexenol and n-hexanol.The effects of the molecular structure and amount of plasticizers on the mechanical and rheological properties of PVC compounds were investigated by means of impact test,tensile test,dynamic mechanical analysis and capillary rheometer.The results indicated that the impact strength of PVC compounds were improved with the addition of two new bio-base plasticizers,and 2,5-dihexyl furan-dicarboxylate exhibited a better plasticizing effect on PVC than 2,5-di-(trans-2-hexene furan-dicarboxylate)ester.When 10 phr of 2,5-dihexyl furan-dicarboxylate was added,the PVC compound obtained an increase in impact strength by 0.28 kJ/m^2 but a decrease in tensile strength by 4.2 MPa compared to the compound containing the same content of dioctyl phthalate.
作者 王一鸣 杜永刚 杨明明 王莉 庄翔杰 WANG Yiming;DU Yonggang;YANG Mingming;WANG Li;ZHUANG Xiangjie(School of Materials Science and Engineering,Shijiazhuang Tiedao University,Shijiazhuang 050043,China;Key Laboratory of Transportation Engineering Materials of Hebei Province,Shijiazhuang 050043,China)
出处 《中国塑料》 CAS CSCD 北大核心 2019年第12期63-68,共6页 China Plastics
基金 河北省高等学校科学技术研究项目(QN2017136) 石家庄铁道大学科研专项(Z661210738) 石家庄铁道大学硕士研究生创新项目(YC2018093)
关键词 聚氯乙烯 生物基增塑剂 2 5呋喃二甲酸 动态力学性能 polyvinyl chloride bio-base plasticizer 2 5-furan dicarboxylic acid dynamic mechanical property
  • 相关文献

参考文献5

二级参考文献69

共引文献65

同被引文献38

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部