期刊文献+

Non-destructive electroluminescence inspection for LED epitaxial wafers based on soft single-contact operation

原文传递
导出
摘要 Non-destructive and accurate inspection of gallium nitride light-emitting diode(Ga N-LED)epitaxial wafers is important to Ga N-LED technology.However,the conventional electroluminescence inspection,the photoluminescence inspection,and the automated optical inspection cannot fulfill the complex technical requirements.In this work,an inspection method and an operation system based on soft single-contact operation,namely,single-contact electroluminescence(SC-EL)inspection,are proposed.The key component of the SC-EL inspection system is a soft conductive probe with an optical fiber inside,and an AC voltage(70Vpp,100 k Hz)is applied between the probe and the ITO electrode under the LED epitaxial wafer.The proposed SC-EL inspection can measure both the electrical and optical parameters of the LED epitaxial wafer at the same time,while not causing mechanical damage to the LED epitaxial wafer.Moreover,it is demonstrated that the SC-EL inspection has a higher electroluminescence wavelength accuracy than photoluminescence inspection.The results show that the non-uniformity of SC-EL inspection is 444.64%,which is much lower than that of photoluminescence inspection.In addition,the obtained electrical parameters from SC-EL can reflect the reverse leakage current(Is)level of the LED epitaxial wafer.The proposed SC-EL inspection can ensure high inspection accuracy without causing damage to the LED epitaxial wafer,which holds promising application in LED technology.
出处 《Photonics Research》 SCIE EI CAS CSCD 2024年第8期1776-1784,共9页 光子学研究(英文版)
基金 National Key Research and Development Program of China(2021YFB3600400) Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China(2020ZZ113)。
  • 相关文献

参考文献3

二级参考文献19

共引文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部