期刊文献+

钢的液相线温度的计算 被引量:20

Calculation on Liquidus Temperature of Steel
下载PDF
导出
摘要 基于最新的Fe i二元相图,系统计算了铁基合金中20种常见合金元素(含量为0%~21%)对纯铁熔点的影响值,据此给出了新的钢的液相线温度计算模型及组元的温度系数,并以齿轮钢为例进行了验证。结果表明,液相线温度的计算精度进一步提高。 Based on the latest Fei binary phase diagram, the effect of 20 common elements with total content of 0 %21 % in ironbased alloy on the melting point of pure iron were researched. A new model for accurately calculating steel liquidus temperature was built, and the new temperature coefficients of element were given. Taken 20CrMnTi and 18Cr2Ni4WA as samples, the calculated value was certified. The results showed that the calculation accuracy of the liquidus temperature was further improved.
出处 《钢铁研究学报》 CAS CSCD 北大核心 2002年第6期6-9,共4页 Journal of Iron and Steel Research
基金 国家"九五"重点科技攻关资助项目(95 524 02 02)
关键词 计算 液相线温度 温度系数 steel liquidus temperature temperature coefficient
  • 引文网络
  • 相关文献

参考文献6

  • 1陈家祥.连续铸钢手册[M].冶金工业出版社,1991..
  • 2宋文林.电弧炉炼钢[M].北京:冶金工业出版社,1995..
  • 3武拥军.钢的液相线温度预报技术研究[M].沈阳:东北大学,1999..
  • 4郑沛然.连续铸钢工艺及设备[M].北京:冶金工业出版社,1990..
  • 5蔡开科.连续铸钢[M].北京:冶金工业出版社,1986..
  • 6姜周华,武拥军,梁连科,王东,王连海.齿轮钢液相线温度预报技术[J].东北大学学报(自然科学版),2000,21(1):76-79. 被引量:1

二级参考文献3

  • 1李传薪,钢铁厂设计原理,1995年,71页
  • 2冶金工业部北京钢铁研究总院与鞍山钢铁公司,八十年代合金钢,1987年,105页
  • 3陈家祥,炼钢常用图表数据手册,1984年,383页

共引文献84

同被引文献151

引证文献20

二级引证文献43

;
使用帮助 返回顶部