摘要
现阶段,我国大多数变压器有载调压的控制水平较低,而经济发达地区输配电容量较大,导致对分接头所施加的有载调压频率较高。对变压器并列有载调压来说,只能借助人工命令,采取监视、执行等措施实现半自动有载调压。由于有载调压的发展水平比较低,因此在一定程度上影响了有载调压的应用范围,这对分接头控制技术造成了影响。
At present,the control level of on-load voltage regulation of most transformers in our country is relatively low,while the transmission and distribution capacity in economically developed areas is relatively large,resulting in a higher frequency of on-load voltage regulation applied to taps. For on-load voltage regulation of transformers in parallel,the semiautomatic on-load voltage regulation can only be realized by means of manual command,monitoring and execution. Because the development level of on-load voltage regulation is relatively low,the application scope of on-load voltage regulation is affected to a certain extent,which has an impact on tapping control technology.
作者
朱月华
ZHU Yue-hua(Guizhou Institute of Industrial Technology,Guiyang 550000,China)
出处
《通信电源技术》
2019年第2期68-69,共2页
Telecom Power Technology
关键词
变压器
有载调压
并列运行
分接头控制
transformer
on-load voltage regulation
parallel operation
tap control