期刊文献+

宝钢2050粗轧带钢宽展规律仿真研究 被引量:5

Simulation study of strip spreading on 2050mm roughing trains of Bao Steel
下载PDF
导出
摘要 采用大型刚塑性有限元软件建立立轧/平轧的三维热应力耦合轧制模型,并将其应用到宝钢2050粗轧机组仿真研究中。选取宝钢轧制带钢的现场实际参数进行模拟计算,得出的粗轧出口宽度值与实测值吻合良好,充分验证了模型的有效性。为了解决宝钢2050粗轧机组宽度难以控制的问题,本文对现场各种轧制工艺的宽展进行了仿真计算,并给出了自然宽展、纯狗骨宽展、综合宽展的分布规律。 A 3D thermo-mechanical coupled model for vertical/horizontal rolling is established using a rigid-plastic FEM software,and is applied to simulate the rolling processes of 2050mm roughing trains in Bao Steel.The calculated width of strip using the actual parameters is in good agrecment with the measured value at the exit of roughing,thus the model is effective.Aiming at the question that the strip width is control difficult to in this study,the spreading law is investigated by FEM simulation.The law of the strip spreading (natural spread,dogbone spread and combined spread) is obtained.
出处 《重型机械》 2004年第1期24-27,共4页 Heavy Machinery
基金 国家自然科学基金项目(5007507)
关键词 热轧 立轧 狗骨 宽展 有限元 带钢 仿真 hot rolling edge rolling dogbone spread FEM
  • 引文网络
  • 相关文献

参考文献6

二级参考文献16

  • 1阎丽霞.热带钢轧机的智能控制技术[J].国外钢铁,1997,22(2):50-52. 被引量:3
  • 2熊尚武,朱祥霖,刘相华,王国栋,张强,李洪斌,孟祥君,韩力.热带粗轧机组调宽工艺中数学模型的建立[J].上海金属,1997,19(1):39-43. 被引量:8
  • 3焦李成.神经网络计算[M].西安:西安电子科技大学出版社,1995..
  • 4黄守汉.塑性变形与轧制[M].北京:冶金工业出版社,1997.207.
  • 5刘明,1990年
  • 6高有志,武钢实习教材,1985年
  • 7Xiong Shangwu,J Mater Eng Perf,1997年,6卷,6期,757页
  • 8熊尚武,博士学位论文,1997年
  • 9熊尚武,塑性工程学报,1996年,4卷,59页
  • 10Chung W K,J Mater Process Technol,1993年,38卷,85页

共引文献35

同被引文献34

引证文献5

二级引证文献21

相关主题

;
使用帮助 返回顶部