期刊文献+

斜航式法向圆弧锥齿轮的测量与误差评定 被引量:2

The Measurement and Error Evaluation of Normal Circular-arc Spiral Bevel Gears
下载PDF
导出
摘要 斜航式法向圆弧锥齿轮是基于Bertrand共轭曲面原理而研制的一种新的锥齿轮传动形式。其特点为承载能力高 ,且十分便于采用指状或盘状铣刀在普通机床上进行成型法加工。为了验证这种传动副设计及加工的正确性 ,提出一种基于三坐标测量机的数据测量与误差评定方法。其原理是根据建立的数学模型 ,对三坐标机上测出的锥齿轮廓面的坐标点集进行有效数据的提取 ,进而获得理想要素 ,并分离出齿形带与齿向带数据 ,经处理得到其齿形与齿向误差信息。通过对样件的实际检测 。 As a new type transmission pair, Normal Circular arc spiral bevel gears based on Bertrand conjugation curve principle has many good characters, such as high loading ability and convenience for machining. In order to measure its tooth profile error, the method based on the Three-coordinate Measurement Instrument is put forward. According to the mathematics model, the tooth profile and orientation strip dates can be separated from the coordinate data, and the error can be obtained. This method is verified by the measurement of some workpieces.
出处 《机械传动》 CSCD 2003年第6期5-7,共3页 Journal of Mechanical Transmission
基金 国家自然科学基金资助项目 :50 2 750 1 7 沈阳市科技局资助项目 (2 0 0 2 0 31 2 )
关键词 法向圆弧 锥齿轮 坐标测量 误差评定 三坐标测量机 数学模型 Normal circular-arc Spiral bevel gear Three-coordinate measurement Error assess
  • 引文网络
  • 相关文献

参考文献4

  • 1邵家辉.圆弧齿轮[M].北京:机械工业出版社,1994..
  • 2吴大仁.微分几何讲义[M].北京:人民教育出版社,1979..
  • 3段振云,刘健,吴宏基,郑鹏,韦茵.斜航式法向圆弧螺旋锥齿轮传动原理研究[J].大连理工大学学报,2002,42(6):697-700. 被引量:15
  • 4曾韬.锥齿轮的设计与加工[M].哈尔滨:哈尔滨工业大学出版社,1989..

二级参考文献2

共引文献29

同被引文献7

引证文献2

二级引证文献2

;
使用帮助 返回顶部