期刊文献+

Shear bond strengths between alumina-toughened zirconia cores and veneering ceramics and their susceptibility to aging

Shear bond strengths between alumina-toughened zirconia cores and veneering ceramics and their susceptibility to aging
下载PDF
导出
摘要 Objective:To evaluate the shear bond strength(SBS) between alumina-toughened zirconia (ATZ) cores and veneering ceramics,investigate the effect of aging in artificial saliva on SBS and compare it with that of yttria-stabilized tetragonal zirconia polycrystals(Y-TZP).Methods:Bars of ATZ and Y-TZP were layered with veneering ceramics in accordance to the recommendation of the manufacturer.Half of each group(n = 10) was aged at 134℃.(under 2 bar pressure) in an autoclave for 48 h.Subsequently,all specimens were subjected to shear force in a universal testing machine.The interface and fractured surface of the specimens were evaluated using scanning electron microscopy and X-ray energy dispersive spectroscopy.Results:The initial mean SBS values in MPa±SD were 28.9±8.0 for ATZ and 26.2±7.6 for Y-TZP.After aging,the mean SBS values for ATZ and Y-TZP were 22.9±4.9 MPa and 22.8±6.9 MPa,respectively.Neither the differences between the SBS values of the ATZ and Y-TZP groups nor the influence of aging on all groups were statistically significant.Conclusions:The SBS between the ATZ core and the veneering ceramics was not affected by aging.The SBS of ATZ to veneering ceramics was not significantly different compared with that of Y-TZP. Objective:To evaluate the shear bond strength(SBS) between alumina-toughened zirconia (ATZ) cores and veneering ceramics,investigate the effect of aging in artificial saliva on SBS and compare it with that of yttria-stabilized tetragonal zirconia polycrystals(Y-TZP).Methods:Bars of ATZ and Y-TZP were layered with veneering ceramics in accordance to the recommendation of the manufacturer.Half of each group(n = 10) was aged at 134℃.(under 2 bar pressure) in an autoclave for 48 h.Subsequently,all specimens were subjected to shear force in a universal testing machine.The interface and fractured surface of the specimens were evaluated using scanning electron microscopy and X-ray energy dispersive spectroscopy.Results:The initial mean SBS values in MPa±SD were 28.9±8.0 for ATZ and 26.2±7.6 for Y-TZP.After aging,the mean SBS values for ATZ and Y-TZP were 22.9±4.9 MPa and 22.8±6.9 MPa,respectively.Neither the differences between the SBS values of the ATZ and Y-TZP groups nor the influence of aging on all groups were statistically significant.Conclusions:The SBS between the ATZ core and the veneering ceramics was not affected by aging.The SBS of ATZ to veneering ceramics was not significantly different compared with that of Y-TZP.
出处 《Asian Pacific Journal of Tropical Medicine》 SCIE CAS 2012年第5期402-405,共4页 亚太热带医药杂志(英文版)
基金 supported by National High-Tech Research and Development Program of China(863 Program)(No.2006AA03Z440)
关键词 Shear BOND strength ZIRCONIA ALUMINA Veneering CERAMICS AGING Shear bond strength Zirconia Alumina Veneering ceramics Aging
  • 相关文献

参考文献23

  • 1Tsubakino H,Nozato R,Hamamoto M.Effect of alumina addition on the tetragonal-to-monoclinic phase transformation in zirconia-3mol% yttria. Journal of the American Ceramic Society . 1991
  • 2M Cattani-Lorente,S Susanne.Low Temperature Degradation of a Y-TZP Dental Ceramic. Acta Biomaterialia . 2011
  • 3A Nevarez-Rascon,A Aguilar-Elguezabal,E Orrantia,MH Bocanegra-Bernal.On the wide range of mechanical properties of ZTA and ATZ based dental ceramic composites by varying the Al2O3 and ZrO2 content. Int J Refract Met H . 2009
  • 4Chevalier J.What future for zirconia as a biomaterial. Biomaterials . 2006
  • 5Schneider J,Begand S,Kriegel R,Kaps C,Glien W,Oberbach T.Low temperature aging behavior of alumina-toughened zirconia. Journal of the American Ceramic Society . 2008
  • 6Isgro G,Pallav P,vander Zel JM,etal.The influence of the veneeringporcelain and different sueface trentment on the biaxial flexural threngthof a heat-pressed ceramic.. The Journal of ProsThetic Dentistry . 2003
  • 7Guess PC,Kulis A,Witkowski S,et al.Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dental Materials . 2008
  • 8Raigrodski AJ,Chiche GJ,Potiket N,et al.The efficacy ofposterior three-unit zirconium-oxide-based ceramic fixedpartial dental prostheses:a prospective climical pilot study. The Journal of ProsThetic Dentistry . 2006
  • 9MARINO C E B,MACARO L H.EIS characterization of a Ti-dental implant in artificial saliva media:dissolution process of the oxide barrier. Journal of Electrocardiology . 2004
  • 10Fernando Z,Simona R,Roberto S,et al.From porcelain-fused-to-metal to zirconia:Clinical andexperimental considerations. Dental Materials . 2011

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部