Reliability analysis for anchorage of reinforced concrete beams with longitudinal cracks due to corrosion at anchorage zone

钢筋混凝土简支梁锚固区锈胀开裂后锚固可靠度分析(英文)

An anchorage reliability analysis approach for simply supported reinforced concrete beams under corrosion attack in the anchorage zone is developed.The first-order second-moment method is employed to analyze the effects of various factors on the anchorage reliability.These factors include both the length and width of cover cracking due to reinforcement corrosion,the cover thickness,the anchorage length,and the stirrup ratio.The results show that the effect of corrosion-induced crack length on the reliability index for anchorage,β0,is negligible when the crack on the concrete surface is just appearing,but with the crack widening,the β0 value is reduced significantly;the considerable changes in β0 result from a variation in cover depth and anchorage length;the effect of changes in the diameter or space of stirrups on the anchorage resistance is very limited,and the variation in β0 is also very low.

为了研究锚固区混凝土锈胀开裂后构件的锚固可靠度的变化情况,采用一次二阶矩方法分析了锈胀裂缝的长度及宽度、保护层厚度、钢筋锚固长度以及配箍率等参数对混凝土简支梁锚固可靠度的影响.分析结果表明:当保护层刚开裂时,锈胀裂缝长度对锚固可靠指标β0的影响很小,此后,随着裂缝宽度的增加,β0有了明显的降低;保护层厚度和锚固长度的变化对β0有相当大的影响;改变箍筋的直径或间距对锚固抗力的影响很小,因此,β0变化的幅度也很小.