摘要
The 13.56 MHz analog front-end circuit for ISO/IEC 15693-compatible radio frequency identification (RFID) trans- ponder IC presented in this paper converts RF power to DC and extracts clock and data from the interrogator by 10% or 100% ASK modulation. The transponder sends data back to the interrogator by load modulation technology. The electrostatic discharge (ESD) protection circuits function to limit RF voltage to a safe level. An inductive coupling simulation modelling for 13.56 MHz RFID system is presented, with simulation results showing that the transponder operates over a wide range of electromagnetic field strength from Hmin (150 mA/m) to Hmax (5 A/m). The transponder IC is implemented in SMIC 0.35-μm three-metal two-poly mixed signal CMOS technology with embedded EEPROM.
The 13.56 MHz analog front-end circuit for ISO/IEC 15693-compatible radio frequency identification （RFID） transponder IC presented in this paper converts RF power to DC and extracts clock and data from the interrogator by 10% or 100% ASK modulation. The transponder sends data back to the interrogator by load modulation technology. The electrostatic discharge （ESD） protection circuits function to limit RF voltage to a safe level. An inductive coupling simulation modelling for 13.56 MHz RFID system is presented, with simulation results showing that the transponder operates over a wide range of electromagnetic field strength from Hmin （150 mA/m） to Hmax （5 A/m）. The transponder IC is implemented in SMIC 0.35-μm three-metal two-poly mixed signal CMOS technology with embedded EEPROM.
