期刊文献+

INFLUENCE OF CAPILLARITY ON NANO-LITER FLOWRATE MEASUREMET WITH DISPLACEMET METHOD 被引量:2

INFLUENCE OF CAPILLARITY ON NANO-LITER FLOWRATE MEASUREMET WITH DISPLACEMET METHOD
原文传递
导出
摘要 Nanoqiter flowrate measurements in micro-tubes with displacement method were performed and the effect of capillarity force on the accuracy was investigated through lab experiments and theoretical analysis in this article. The experiments were conducted under the pressure drops ranging from 1 kPa to 10 kPa in a circular pipe with a diameter of 50 pm, to give the pressure-flowrate (P-Q) relation and verify the applicability of the classical Hagen-Poiseuille (HP) formula. The experimental results showed that there existed a discrepancy between the experimental data and the theoretical values predicted by the HP formula if the capillary effect was not considered, which exceeded obviously the limit of the system error. And hence a modified formula for the relation, taking the capillary effect into account, was presented through theoretical deduction, and after the HP formula had been modified the error was proved to be less than 3%, which was permitted in comparison with the system error. It was also concluded that only by eliminating the effect of the capillary force in experiments could the original HP formula be employed to predict the pressure-flowrate relation in the Hagen-Poiseuille flow in the micro-tube. Nanoqiter flowrate measurements in micro-tubes with displacement method were performed and the effect of capillarity force on the accuracy was investigated through lab experiments and theoretical analysis in this article. The experiments were conducted under the pressure drops ranging from 1 kPa to 10 kPa in a circular pipe with a diameter of 50 pm, to give the pressure-flowrate (P-Q) relation and verify the applicability of the classical Hagen-Poiseuille (HP) formula. The experimental results showed that there existed a discrepancy between the experimental data and the theoretical values predicted by the HP formula if the capillary effect was not considered, which exceeded obviously the limit of the system error. And hence a modified formula for the relation, taking the capillary effect into account, was presented through theoretical deduction, and after the HP formula had been modified the error was proved to be less than 3%, which was permitted in comparison with the system error. It was also concluded that only by eliminating the effect of the capillary force in experiments could the original HP formula be employed to predict the pressure-flowrate relation in the Hagen-Poiseuille flow in the micro-tube.
出处 《Journal of Hydrodynamics》 SCIE EI CSCD 2007年第5期594-600,共7页 水动力学研究与进展B辑(英文版)
基金 supported by the National Natural Science Foundation of China (Grant No. 10272107) Major Innovation Project of Chinese Academy of Sciences(Grant No. KJCX2-SW-L2).
关键词 nano-liter flowrate measurement Hagen-Poiseuille (HP) formula displacement method capillarity force nano-liter, flowrate measurement,Hagen-Poiseuille (HP) formula, displacement method,capillarity force
  • 相关文献

参考文献4

二级参考文献26

  • 1王晓敏,姜贵庆,王岩.三维绕空腔流的有限元数值模拟及流场拓扑结构[J].空气动力学学报,1996,14(3):316-321. 被引量:1
  • 2[2]Ho C M, Tai Y C 1996 J. Fluids Engin. 118 437
  • 3[3]YuXM, Jiang X S2001 Chin. Phys. 10918
  • 4[4]Mohamed G H 1999 J. Fluids Engin. 121 5
  • 5[6]Harley J, Bau H, Zemel J N 1989 Proc. IEEE MEMS(Salt Lake City:IEEE) p25
  • 6[7]Beskok A, Karniadakis G E, Trimmer W 1996 Trans. ASME 118448
  • 7[8]Yao Z H, Yoder G L et al 2002 Chin. Phys. 11 226
  • 8[9]Choi S B, Barron R F, Warrington R O 1991 ASME DSC 32 123
  • 9[10]Pong K, HoC, Liu J1994 ASME FED197 51
  • 10[11]Arkilic E B, Schmidt M A, Breuer K S 1997 J. MEMS 6 167

共引文献42

同被引文献19

  • 1LIUZhong-chun,YUEXiang-an,HOUJi-rui,ZHANGLi-juan.EXPERIMENTAL STUDY OF MICROSCALE FLOW FOR MICRO MOLECULE LIQUID AND POLYMER SOLUTION[J].Journal of Hydrodynamics,2005,17(3):352-357. 被引量:1
  • 2A. S. Rawool,Sushanta K. Mitra,S. G. Kandlikar.Numerical simulation of flow through microchannels with designed roughness[J]. Microfluidics and Nanofluidics . 2006 (3)
  • 3CELATA G. P.,CUMO M.,GULIELMI M. et al.Experimental investigation of hydraulic and single phase heat transfer in 0.130 mm capillary tube. Nanoscale and Microscale Thermophysical Engineering . 2002
  • 4LI Z. X,DU D. X,GUO Z. Y.Experimental study on flow characteristics of liquid in circular microtubes. Proceedings of the International conference on Heat Transfer and Transport Phenomena in Microscale . 2000
  • 5KLEINSTREUER C,KOO L.Computational analysis of wall roughness effects for liquid flow in micro-conduits. Journal of Fluids Engineering Transactions of the ASME . 2004
  • 6WANG Hao-li,WANG Yuan,ZHANG Jia-zhong.Influence of ribbon structure rough wall on the microscale Poiseuille flow. Journal of Fluids Engineering Transactions of the ASME . 2005
  • 7WANG Hao-li,WANG Yuan.Flow in microchannels with rough walls: Flow pattern and pressure drop. Journal of Micromechanics and Microengineering . 2007
  • 8WANG Hao-li,WANG Yuan.Influence of three- dimensional wall roughness on the laminar flow in microtube. International Journal of Heat and Fluid Flow . 2007
  • 9Wu PY,Little WA.Measurement of Friction Factors for the Flow of Gases in Very Fine Channels Used for Microminiature Joule-Thomson Refrigerators. Cryogenics . 1983
  • 10Gh Mohiuddin Mala,Li Dongqing.Flow characteristics of water in microtubes. International Journal of Heat and Fluid Flow . 1999

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部