期刊文献+

Effects of Ga,Al,Ag,and Ce multi-additions on the wetting characteristics of Sn-9Zn lead-free solder 被引量:3

Effects of Ga,Al,Ag,and Ce multi-additions on the wetting characteristics of Sn-9Zn lead-free solder
下载PDF
导出
摘要 An orthogonal method was used to evaluate the effects of Ga, Al, Ag, and Ce multi-additions on the wetting characteristics of Sn-9Zn lead-free solders by wetting balance method. The results show that the optimal loading of Ga, Al, Ag, and Ce was 0.2 wt.%, 0.002 wt.%, 0.25 wt.%, and 0.15 wt.%, respectively. Intermetallic compounds (IMCs) formed at the interface between Sn-9Zn-0.2Ga-0.002Al-0.25Ag- 0.15Ce solder and Cu substrate were investigated by scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) analysis. The SEM images illustrate that the IMCs can be divided into two portions from the substrate side to the solder side: a planar CusZns layer and an additional continuous scallop-like AgZn3 layer. The EDS analysis also shows that Ga segregates in the solder abutting upon the interface. X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) of the surface components of Sn-9Zn-0.2Ga-0.002Al- 0.25Ag-0.15Ce solder indicate that Al aggregates at the surface in the form of Al203 protective fdm, which prevents the further oxidation of the solder surface. On the other hand, Ce aggregates at the subsurface, which may reduce the surface tension of the solder and improve the wettability in consequence. An orthogonal method was used to evaluate the effects of Ga, Al, Ag, and Ce multi-additions on the wetting characteristics of Sn-9Zn lead-free solders by wetting balance method. The results show that the optimal loading of Ga, Al, Ag, and Ce was 0.2 wt.%, 0.002 wt.%, 0.25 wt.%, and 0.15 wt.%, respectively. Intermetallic compounds (IMCs) formed at the interface between Sn-9Zn-0.2Ga-0.002Al-0.25Ag- 0.15Ce solder and Cu substrate were investigated by scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) analysis. The SEM images illustrate that the IMCs can be divided into two portions from the substrate side to the solder side: a planar CusZns layer and an additional continuous scallop-like AgZn3 layer. The EDS analysis also shows that Ga segregates in the solder abutting upon the interface. X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) of the surface components of Sn-9Zn-0.2Ga-0.002Al- 0.25Ag-0.15Ce solder indicate that Al aggregates at the surface in the form of Al203 protective fdm, which prevents the further oxidation of the solder surface. On the other hand, Ce aggregates at the subsurface, which may reduce the surface tension of the solder and improve the wettability in consequence.
出处 《Rare Metals》 SCIE EI CAS CSCD 2009年第6期600-605,共6页 稀有金属(英文版)
关键词 METALLOGRAPHY lead-free solder wetting balance method WETTABILITY intermetallic compounds metallography lead-free solder wetting balance method wettability intermetallic compounds
  • 相关文献

参考文献16

  • 1Zhang N., Shi Y.W., Xia Z.D., Lei Y.P., Guo F., and Li X.Y, Investigation on impact strength of the as-soldered Sn37Pb and Sn3.8Ag0.7Cu solder joints, J Mater. Sci. Mater. Electron., 2009, 20 (6): 499.
  • 2McCormack M. and Jin S., New, lead-free solders, J. Electron. Mater., 1994, 23 (7): 635.
  • 3Glazer J., Microstructure and mechanical properties of Pb-free solder alloys for low-cost electronic assembly: A review, J. Electron Mater., 1994, 23 (8): 693.
  • 4Lin K.L. and Liu T.P., High-temperature oxidation of an Sn-Zn-Al solder, Oxid. Met., 1998, 50 (3/4): 255.
  • 5Chen X., Hu A.M., Li M., and Mao D.L., Effect of a trace of Cr on intermetallic compound layer for tin-zinc lead-free solder joint during aging, J. Alloys Compd., 2009, 470 (1-2): 429.
  • 6Chen K.I., Cheng S.C., and Wu S., Effects of small additions of Ag, Al, and Ga on the structure and properties of the Sn-9Zn eutectic alloy, J. Alloys Compd., 2006, 416 (1-2): 98.
  • 7Mahmudi R., Geranmayeh A.R., Khanbareh H., Jahangiri N., Khanbareh H., and Jahangiri N., A comparison of impression, indentation and impression-relaxation creep of lead-free Sn-9Zn and Sn-8Zn-3Bi solders at room temperature, J. Mater. Sci. Mater. Electron., 2009, 20 (4): 312.
  • 8Chang T.C., Wang J.W., Wang M.C., and Hon M.H., Solderability of Sn-9Zn-0.5Ag-1In lead-free solder on Cu substrate: Part 1. Thermal properties, microstructure, corrosion and oxidation resistance, J. Alloys Compd., 2006, 422 (1-2): 239.
  • 9Suganuma K., Niihara K., Shoutoku T., and Nakamura Y., Wetting and interface microstructure between Sn-Zn binary alloys and Cu, J. Mater. Res., 1998, 13 (10): 2859.
  • 10Song J.M., Liu P.C., Shih C.L., and Lin K.L., Role of Ag in the formation of interfacial intermetaUic phases in Sn-Zn soldering, J. Electron Mater., 2005, 34 (9): 1249.

同被引文献58

  • 1樊江磊,翟恒涛,刘占云,刘建秀.Sn-Cu-Ni系无铅钎料研究进展[J].热加工工艺,2020,0(5):1-6. 被引量:4
  • 2魏保明.金属腐蚀理论及应用[M].北京:化学工业出版社,2004.
  • 3Hidaka N, Watanabe H, Yoshiba M. Creep behavior of lead-free Sn-Ag-Cu + Ni-Ge solder alloys [ J ]. Journal of Electronic Materials ,2009,38 (5) :670 - 677.
  • 4Zhang L, Xue S B, Gao L L, et al. Development of Sn-Zn lead-free solders bearing alloying elements [ J ]. Journal Materials Science: Materials Electronics, 2010.21 ( 1 ) :1 - 15.
  • 5Zhao H,Wang H Q, Sekulic D P, et al. Spreading kinetics of liquid solders over an intermetallic solid surface. Part2 :lead-free solders [ J]. Journal of Electronic Materials,2009,38 (9) : 1846 - 1854.
  • 6Tsat Y L,Hang W S. Pasty ranges and latent heat release models for Sn-9Zn-xAg lead-free solder alloys [J]. Materials Transactions, 2004,45 ( 6 ) : 1949 - 1957.
  • 7Eckert S, Nikrityuk P A, Rabiger D, et al. Efficient melt stirring using pulse sequences of a rotating magnetic field:Part Ⅰ flow field in a liquid metal column [ J ]. Metallurgical and Materials Transactions B, 2007,28B : 977 - 988.
  • 8Ma H, Jeffrey C, Suhling J C. A review of mechanical properties of lead-free solders for electronic packaging [ J ]. Journal Materials Science, 2009,44 ( 5 ) : 1141 - 1158.
  • 9崎诚三,平林真.二元合金状态图集[M].刘安生,译.北京:冶金工业出版社,2004:19,142,279.
  • 10Islam R A,Wu B Y, Alam M O, et al. Investigations on microhardness of Sn-Zn based lead-free solder al- loys as replacement of Sn-Pb solder [ J ]. Journal of Alloys and Compounds,2005,392(1/2) :149 -158.

引证文献3

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部