期刊文献+

Atmospheric-pressure Air Plasma Treatment of Polyester Fabrics for Inkjet Printing with Pigment Inks 被引量:1

Atmospheric-pressure Air Plasma Treatment of Polyester Fabrics for Inkjet Printing with Pigment Inks
下载PDF
导出
摘要 Without any preprocessing,polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Pretreatments of polyester fabric were carried out with atmospheric air plasma under different experimental conditions. After plasma treatment the samples were printed with magenta pigment ink. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses indicated that the enhanced color performance was mainly contributed by not only the etching effect but also oxygen-containing polar groups induced onto fiber surfaces through plasma treatment. Thereby the surface modification of polyester fabrics using atmospheric-pressure air plasma offers a potential way to fabric pretreatment for pigment inkjet printing with the advantages of environmental friendly and energy saving over traditional pretreatment methods. Without any preprocessing, polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Pretreatments of polyester fabric were carried out with atmospheric air plasma under different experimental conditions. After plasma treatment the samples were printed with magenta pigment ink. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses indicated that the enhanced color performance was mainly contributed by not only the etching effect but also oxygen-containing polar groups induced onto fiber surfaces through plasma treatment. Thereby the surface modification of polyester fabrics using atmospheric-pressure air plasma offers a potential way to fabric pretreatment for pigment inkjet printing with the advantages of environmental friendly and energy saving over traditional pretreatment methods.
出处 《Journal of Donghua University(English Edition)》 EI CAS 2009年第4期429-434,共6页 东华大学学报(英文版)
基金 New Century Excellent Talents of China ( NCET,No.040495) National Natural Science Foundation of China(NSFC, No.20474025) National Key Technology R&DProgram,China (No.2007BAE40B01) Innovative Research Team of Jiangnan University,China
关键词 inkjet printing surface'modified plasma polyester fabric SEM XPS 等离子体处理 颜料墨水 空气等离子 涤纶织物 喷墨打印 常压 X射线光电子能谱 扫描电子显微镜
  • 相关文献

参考文献11

  • 1Yuri Akishev,Michail Grushin,Anatoly Napartovich,Nikolay Trushkin.Novel AC and DC Non-Thermal Plasma Sources for Cold Surface Treatment of Polymer Films and Fabrics at Atmospheric Pressure[J].Plasmas and Polymers.2002(3)
  • 2Shenton MJ,Stevens GC,Wright NP,et al.Chemical- surface Modification of Polymers Using At mospheric Pressure Nonequilibrium Plas mas and Comparisons with Vacuum Plas mas[].Journal of Polymer Science Part A: Polymer Chemistry.2001
  • 3Hwang YJ,Matthews S R,McCord MG,et al.Surface Modification of Organic Polymer Fil ms Treated in At mospheric Plas mas[].Journal of the Electrochemical Society.2004
  • 4Gawish S M,Matthews S R,Wafa D M,et al.At mospheric Plas ma-aided Biocidal Finishes for Nonwoven Polypropylene Fabrics I . Synthesis and Characterization[].Journal of Applied Polymer Science.2007
  • 5Molina R,Espino J P,Yubero F,et al.XPS Analysis of Down Stream Plas ma Treated Wool : Influence of the Nature of the Gas onthe Surface Modification of Wool[].Applied Surface Science.2005
  • 6McCord MG,Hwang YJ,Hauser PJ,et al.Modifying nylon and polypropylene fabrics with atmospheric pressure plasma[].Textile Research Journal.2002
  • 7Xue Chao-Hua,,Shi Min-Min,Chen Hong-Zheng,et al.Preparation and Application of Nanoscale Microemulsionas Binder for Fabric Inkjet Printing[].Colloids and Sur-faces A:Physicochemical and Engineering Aspects.2006
  • 8Owen P.Digital printing:a world of opportunity fromdesign to production[].AATCC Review.2003
  • 9YUEN C W M,JIANG S Q,KAN C W,et al.Influence of surface treatment on the electroless nickel plating of textile fabric[].Applied Surface Science.2007
  • 10Tomiji Wakida,Seiji Tokino.Surface Characteristics of Wool and Poly (ethylene Terephthalate) Fabrics and Film Treated with Low - Temperature Plasma Under Atmospheric Pressure[].Textile Research Journal.1993

同被引文献17

  • 1HAIDARA Hamidou, AYDA Baffoun, VIALLIER Pierre. Morphology-dependent properties and swelling-induced transition in 'sodium-alginate/urea' thin films[J]. Polymer, 2004, 45:8333 - 8338.
  • 2CHOIPSR, YUEN CW M, KU SKA, etal. Digital ink-jet printing for chitosan-treated cotton fabric [J]. Fibers and Polymers, 2005, 6(3 ) :229 -234.
  • 3YUEN C W M, KU S K A, KAN C W, et al. A two- bath method for digital ink-jet printing of cotton fabric with chitosan [ J ]. Fibers and Polymers, 2007, 8 (6) :625 -628.
  • 4YUEN C W M, KU S K A, CHOI P S, et al. The effect of the pretreatment print paste contents on colour yield of an ink-jet printed cotton fabric [ J ]. Fibers and Polymers, 2004, 5(2):117- 121.
  • 5KAIMOUZ Wassim Ahmad, WARDMAN Roger H, CHRISTIE Robert M. The inkjet printing process for Lyocell and cotton fibres, part 1 : the significance of pre- treatment chemicals and their relationship with colour strength, absorbed dye fixation and ink penetration[ J]. Dyes and Pigments, 2010, $4:79 - 87.
  • 6YUEN C W M, KAN C W, JIANG S Q, et al. Optimum condition of ink-jet printing for wool fabric[J]. Fibers and Polymers, 2010, 11 (2) :229 - 233.
  • 7PHATTANARUDEE S, CHAKVATTANATHAM K, KIATKAMJORNWONG S. Pretreatment of silk fabric surface with amino compounds for ink jet printing [J].Progress in Organic Coatings, 2009, 64:405 - 418.
  • 8KAN C W, YUEN C W M, TSOI W Y. Using atmospheric pressure plasma for enhancing the deposition of printing paste on cotton fabric for digital ink-jet printing[ J]. Cellulose, 2011, 18:827 - 839.
  • 9FANG Kuanjun, ZHANG Chunming. Surface physical- morphological and chemical changes leading to performance enhancement of atmospheric pressure plasma treated polyester fabrics for inkjet printing [J]. Applied Surface Science, 2009, 255:7561 -7567.
  • 10ZHANG Chumning, FANG Kuanjun. Surface modification of polyester fabrics for inkjet printing with atmospheric-pressure air/Ar plasma [ J ]. Surface & Coatings Technology, 2009, 203:2058 - 2063.

引证文献1

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部