期刊文献+

Mg-Sn-Y三元系富Mg角500℃等温截面的测定 被引量:10

Determination of isothermal section of Mg-riched corner in Mg-Sn-Y ternary system at 500 ℃
下载PDF
导出
摘要 采用合金法,利用XRD、SEM-EDS测定一系列Mg-Sn-Y三元合金在500℃下富Mg角处相平衡关系及各相平衡成分,建立Mg-Sn-Y三元系在500℃下富Mg角处的等温截面相图。结果表明:Mg-Sn-Y三元系富Mg角处存在Mg2Sn、MgSnY、Sn3Y5和Mg24+xY54种化合物与α-Mg固溶体平衡,从而构建3个三相区和4个两相区;Sn在α-Mg基体中的固溶度为2.5%~3.9%(摩尔分数),Y在α-Mg基体中的固溶度为1.1%,但二者不能同时固溶到α-Mg基体中,同时Sn3Y5相中大约可以固溶3.6%~4.1%的金属Mg;由于MgSnY和Sn3Y5等一些高熔点化合物在高温下能够稳定存在,使得Mg-Sn-Y体系有可能成为一种潜在的新型耐热镁合金。 By equilibrated alloy method the phase equilibria relation and phase equilibria composition of the Mg-riched corner in the Mg-Sn-Y ternary system at 500℃ were determined by XRD and SEM-EDS, thus the isothermal section of this ternary system was constructed. The results show that four intermetallic compounds exist in equilibrium with the a-Mg solid solution, i.e. Mg2Sn, MgSnY, Sn3Y5 and Mg24+xY5. Therefore, three three-phase regions and four two-phase regions are constructed. The solubility of Sn and Y in the a-Mg solid solution are 2.5%-3.9% and 1.1% (mole fraction), respectively, but they can not be simultaneously soluted in α-Mg solid solution. In addition, about 3.6%-4.1% Mg is detected in the Sn3Y5 phase. Due to high thermal stability of the compounds such as MgSnY and Sn3Y5, it is thus expected that the Mg-Sn-Y-based alloy could be a promising creep resistant alloy by appropriate alloy design and processing.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2010年第2期177-181,共5页 The Chinese Journal of Nonferrous Metals
基金 国家"十一五"重点科技资助项目(2006BAE04B09-7) 国家自然科学基金重点资助项目(50731002) 辽宁省教育厅重点实验室资助项目(2008S089)
关键词 Mg-Sn-Y三元系 相平衡 等温截面 固溶度 Mg-Sn-Y ternary system phase equilibrium isothermal section solubility
  • 相关文献

参考文献20

  • 1KIM N J. Design of high performance structural alloys using second phases[J]. Mater Sci Eng A, 2007, 449/451 : 51-56.
  • 2MORDIKE B L. Development of highly creep resistant magnesium alloys[J]. Journal of Materials Processing Technology, 2001, 117(3): 391-394.
  • 3MORDIKE B L, EBERT T. Magnesium properties-applications-potential[J]. Mater Sci Eng A, 2001, 302(1): 37-45.
  • 4张剑平,艾云龙,陈乐平.AZ91镁合金的抗高温蠕变性能和腐蚀性能的研究近况[J].铸造,2007,56(8):779-783. 被引量:6
  • 5LIU H M, CHEN Y G, TANG Y B, WEI S H, NIU G. The microstructure, tensile properties, and creep behaviour of as-cast Mg-(1-10)% Sn alloys[J]. Journal of Alloys and Compounds, 2007, 440(1/2): 122-126.
  • 6BAMBERGER M, DEHM G. Trends in the development of new Mg alloys[J]. Annual Reviews Materials Research, 2008, 38: 505-533.
  • 7KANG D H, PARK S S, OH Y S, KIM N J. Effect of nano-particles on the creep resistance of Mg-Sn based alloys[J]. Mater Sci EngA, 2007, 449/451: 318-321.
  • 8孙扬善,翁坤忠,袁广银.Sn对镁合金显微组织和力学性能的影响[J].中国有色金属学报,1999,9(1):55-60. 被引量:129
  • 9LIU H M, CHEN Y G, TANG Y B, HUANG D M, NIU G. The microstructure and mechanical properties of permanent-mould cast Mg-5% Sn-(0-2.6)wt% Di alloys[J]. Mater Sci Eng A, 2006, 437(2): 348-355.
  • 10LIU H M, CHEN Y G, TANG Y B, WEI S H, NIU G. Tensile and indentation creep behavior of Mg-5Sn and Mg-5 Sn-2 Di alloys[J]. Mater Sci Eng A, 2007, 464(1/2): 124-128.

二级参考文献51

共引文献148

同被引文献95

引证文献10

二级引证文献38

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部