期刊文献+

硫化体系对CM/EPDM共混胶性能的影响 被引量:1

Effects of Curing Systems on the Properties of CM/EPDM Blend
下载PDF
导出
摘要 研究了不同硫化体系及过氧化物硫化体系中硫化剂用量对CM/EPDM共混胶性能的影响。结果表明,过氧化物(DCP/S)硫化体系的胶料具有适宜正硫化时间和较好综合物理机械性能;采用RCAD配方优化设计中的均匀设计法进行了实验设计,并根据优选结果绘制了等高线图;在实验范围内,DCP比CAMV的影响显著;当DCP用量为2.8~4份且CAMV用量为3~5份时,共混胶硫化胶具有较高拉伸强度和撕裂强度、较低压缩永久变形和较好耐磨性能。 Effects of curing agent dosage of different curing systems and peroxide curing system on the properties of CM/EPDM blend were studied.The results showed that the blend cured with DCP/S had suitable optimum cure time and good combrehensive physical-mechanical properties.The experiment design was carried on by using the Uniform Design method of RCAD formula optimization design,and their contour maps were drawed according to the optimization results.The affecting results of DCP was bigger than that of CAMV in experimental range.The blend had high tensile strength and tear strength,low compression set and good wearability when DCP/CAMV dosage was 2.8~4 phr/3~5phr.
出处 《特种橡胶制品》 2010年第3期5-10,15,共7页 Special Purpose Rubber Products
关键词 CM/EPDM共混胶 硫化体系 DCP S CM/EPDM blend curing system DCP S
  • 相关文献

参考文献8

二级参考文献22

共引文献113

同被引文献9

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部