期刊文献+

Preparation, Curing Reactivity and Thermal Properties of Titanium-doped Silicone Resins 被引量:4

Preparation, Curing Reactivity and Thermal Properties of Titanium-doped Silicone Resins
下载PDF
导出
摘要 Novel titanium-doped silicone resins were synthesized from low-cost silane monomers and tetrabutyl titanate as raw materials and hydrochloric acid as catalyst, with titanium element as dopant into principal chain of Si-O-Si. The resins were characterized by means of FTIR, IH NMR and 13C NMR spectra, their thermal properties and curing properties were investigated and their corresponding films were determined. The results show that the thermal stability and storage stability of the resins were influenced by the types of silane monomers containing dif- ferent carbon atomicities of organic group. The thermal stability of the titanium-doped silicone resin with a molar ratio of silane monomer B(n-propyl triethoxysilane) to silane monomer C(n-octyl triethoxysilane) being 1:1 is superior to that of the resin with a molar ratio of silane monomer B to silane monomer C being 1:3. However, the storage stability of the former is inferior to that of the latter. This work also showed that the synthesized titanium-doped silicone resins have the highest thermal stability up to 450--500℃ with an atomicity molar ratio of 1:4 of titanium to silicon in the reactants. But the best storage stability of the resin prepared from the reactants with an atomicity molar ratio of 1:6[n(Ti):n(Si)] was obtained. The effect of the type and content of curing agent on the curing properties of the resin was also studied. Moreover, thermal mechanism and curing mechanism were proposed in this work. Novel titanium-doped silicone resins were synthesized from low-cost silane monomers and tetrabutyl titanate as raw materials and hydrochloric acid as catalyst, with titanium element as dopant into principal chain of Si-O-Si. The resins were characterized by means of FTIR, IH NMR and 13C NMR spectra, their thermal properties and curing properties were investigated and their corresponding films were determined. The results show that the thermal stability and storage stability of the resins were influenced by the types of silane monomers containing dif- ferent carbon atomicities of organic group. The thermal stability of the titanium-doped silicone resin with a molar ratio of silane monomer B(n-propyl triethoxysilane) to silane monomer C(n-octyl triethoxysilane) being 1:1 is superior to that of the resin with a molar ratio of silane monomer B to silane monomer C being 1:3. However, the storage stability of the former is inferior to that of the latter. This work also showed that the synthesized titanium-doped silicone resins have the highest thermal stability up to 450--500℃ with an atomicity molar ratio of 1:4 of titanium to silicon in the reactants. But the best storage stability of the resin prepared from the reactants with an atomicity molar ratio of 1:6[n(Ti):n(Si)] was obtained. The effect of the type and content of curing agent on the curing properties of the resin was also studied. Moreover, thermal mechanism and curing mechanism were proposed in this work.
出处 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2010年第5期851-856,共6页 高等学校化学研究(英文版)
基金 Supported by the Science and Technology Project of Guangdong Province, China(No.2009B011000012)
关键词 Titanium-doped silicone resin Synthesis Thermal stability CURING Mechanism Titanium-doped silicone resin Synthesis Thermal stability Curing Mechanism
  • 相关文献

参考文献28

  • 1Tao Z., Yang S., Chen J., Fan L., European Polymer Journal, 2007, 43(10), 1470.
  • 2Tang H., Song N., Chen X., Fan X., Zhou O., Journal of Applied Polymer Science, 2008, 109(7), 190.
  • 3Wu Y., Frederick J., McGarry, Polymer Engineering and Seienee, 2005, 11(45), 1522.
  • 4Zhang Y., Huang Y., Liu X., Yu Y., Journal of Applied Polymer Science, 2003, 89(7), 1702.
  • 5Wang S., Coating and Application, 1990, 19(4), 1.
  • 6Wang Y., Zhao P., Song Y., Feng C., High Technology Letters, 2000, 10(8), 94.
  • 7Feng Y., Liang J., Liang G., Ji Z., Wang J., Journal of Aeronautical Materials, 2003, 23(3), 38.
  • 8Alvarez-Herrero A., Ramos G., del Monte F., Bernabeu E., Levy D., Thin Solid Films, 2004, 455(5), 356.
  • 9Permpoon S., Houmard M., Riassetto D., Rapenne L., Bertome G., Joud J. C., Langlet M., Thin Solid Films, 2008, 516(6), 957.
  • 10Houmard M., Riassetto D., Roussel F., Bourgeois A., Berthome G., Joud J. C., Langlet M., Applied Surface Science, 2007, 254(5), 1405.

同被引文献24

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部