期刊文献+

Roasting Properties of Pellets With Iron Concentrate of Complex Mineral Composition 被引量:12

Roasting Properties of Pellets With Iron Concentrate of Complex Mineral Composition
原文传递
导出
摘要 Investigation was conducted on roasting properties of pellets with an iron concentrate of complex mineral composition. The results indicated that the pellets of complex mineral composition concentrate required higher pre- heating temperature and longer preheating time than that of single magnetite concentrate. Therefore, it is difficult for preheated pellets to withstand the mechanical collision in the roasting process in rotary kiln. It was found that after the iron concentrate being subjected to high pressure roll grinding, the specific surface area reached 2 029. i cm2/g. Consequently, the preheating and roasting temperature of pellets were decreased by 70 and 50 ℃ and preheating and roasting time were decreased by 2 and 4 min, respectively. Meanwhile, the compression strength of preheated and roasted pellets were increased by 200 N for a pellet and 220 N for a pellet, respectively. The mechanism lied in that the increase of specific surface area activated thermal reaction and promoted formation of inter-grain bridge. Investigation was conducted on roasting properties of pellets with an iron concentrate of complex mineral composition. The results indicated that the pellets of complex mineral composition concentrate required higher pre- heating temperature and longer preheating time than that of single magnetite concentrate. Therefore, it is difficult for preheated pellets to withstand the mechanical collision in the roasting process in rotary kiln. It was found that after the iron concentrate being subjected to high pressure roll grinding, the specific surface area reached 2 029. i cm2/g. Consequently, the preheating and roasting temperature of pellets were decreased by 70 and 50 ℃ and preheating and roasting time were decreased by 2 and 4 min, respectively. Meanwhile, the compression strength of preheated and roasted pellets were increased by 200 N for a pellet and 220 N for a pellet, respectively. The mechanism lied in that the increase of specific surface area activated thermal reaction and promoted formation of inter-grain bridge.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2011年第7期1-7,共7页
基金 Item Sponsored by National Natural Science Foundation of China(50725416)
关键词 PELLET iron concentrate high pressure roll grinding (HPRG) specific surface area pellet iron concentrate high pressure roll grinding (HPRG) specific surface area
  • 相关文献

参考文献3

二级参考文献11

  • 1王昌安,王新继,张一敏,陈铁军.原料高压辊磨对球团氧化活化能的影响[J].钢铁研究,2005,33(1):8-10. 被引量:6
  • 2王昌安,王新继,胡承凡,霍聿诚.辊磨预处理磁铁精矿活化机理初探[J].烧结球团,2005,30(2):16-19. 被引量:14
  • 3MeyerK著 杉木译.铁矿石球团法[M].北京:冶金工业出版社会,1980..
  • 4GBusch HSchade著 郭威孚 史敬孚译.固体物理学讲义[M].高等教育出版社,1987.194-198.
  • 5傅菊英 姜涛 朱德庆.烧结球团[M].长沙:中南工业大学出版社,1996..
  • 6傅菊英,朱德庆.铁矿氧化球团基本原理、工艺及设备[M].长沙:中南大学出版社,2004.
  • 7Zhu Deqing, Pan Jian, Qiu Guanzhou, et, al. Mechano-chemical activation of magnetite concentrate for improving its pelletability by high pressure roll grinding [ J ]. ISIJ Internatonal, 2004,44 ( 2 ) : 310-315.
  • 8Qiu Guanzhou, Zhu Deqing, Pan Jian, et al. Improve the oxidizing kinetics of pelletization of magnetite concentrate by high press roll grinding [ J]. ISIJ Internatonal,2004,44( 1 ) :69-73.
  • 9I.B.克鲁莫斯基,刘建远,陈雷.高压辊磨机的粉碎模型[J].国外金属矿选矿,1998,35(9):16-21. 被引量:6
  • 10黄柱成,张元波,陈耀铭,庄剑鸣.以赤铁矿为主配加磁铁矿制备的氧化球团矿显微结构[J].中南工业大学学报,2003,34(6):606-610. 被引量:10

共引文献29

同被引文献99

引证文献12

二级引证文献80

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部