Selection of time step for pseudodynamic testing

Although the step degree of nonlinearity has been introduced to conduct basic analysis and error propagation analysis for the pseudodynamic testing of nonlinear systems, it cannot be reliably used to select an appropriate time step before performing a pseudodynamic test. Therefore, a novel parameter of instantaneous degree of nonlinearity is introduced to monitor the stiffness change at the end of a time step, and can thus be used to evaluate numerical and error propagation properties for nonlinear systems. Based on these properties, it is possible to select an appropriate time step to conduct a pseudodynamic test in advance. This possibility is very important in pseudodynamic testing, since the use of an arbitrary time step might lead to unreliable results or even destroy the test specimen. In this paper, guidelines are proposed for choosing an appropriate time step for accurate integration of nonlinear systems. These guidelines require estimation of the maximum instantaneous degree of nonlinearity and the solution of the initial natural frequency. The Newmark explicit method is chosen for this study. All the analytical results and the guidelines proposed are thoroughly confirmed with numerical examples.