期刊文献+

Factors Influencing Droplet Size of Silicone Oil Emulsion with High Solid Content 被引量:2

Factors Influencing Droplet Size of Silicone Oil Emulsion with High Solid Content
下载PDF
导出
摘要 A silicone oil emulsion with 60% of solid content was prepared with methyl silicone oil used as the main material by means of the emulsifier-in-oil method.The influence of emulsification conditions on the droplet diameter of silicone oil emulsion was discussed.The experimental results showed that the emulsification method,including the quantity of the emulsifier,the time and temperature of emulsification,the emulsifying water dosage,and the stirring speed,had significant impact on the droplet size.The optimal conditions were identified to achieve a smallest droplet diameter of the emulsion at an emulsifier dosage of 6%,an emulsification temperature of 70 ℃,an emulsification time of 30 min,and a stirring speed of 1100 r/min,with water added in two portions at a ratio of 1:1.The high-solid content silicone oil emulsion with a mean droplet diameter of 2.731 μm was prepared under these conditions that could ensure absence of stratification and floating oil under centrifuging at a speed of 3000 r/min for 30 min. A silicone oil emulsion with 60% of solid content was prepared with methyl silicone oil used as the main material by means of the emulsifier-in-oil method. The influence of emulsification conditions on the droplet diameter of silicone oil emulsion was discussed. The experimental results showed that the emulsification method, including the quantity of the emulsifier, the time and temperature of emulsification, the emulsifying water dosage, and the stirring speed, had significant impact on the droplet size. The optimal conditions were identified to achieve a smallest droplet diameter of the emulsion at an emulsifier dosage of 6%, an emulsification temperature of 70 ℃, an emulsification time of 30 min, and a stirring speed of 1100 r/min, with water added in two portions at a ratio of 1:1. The high-solid content silicone oil emulsion with a mean droplet diameter of 2.731 μm was prepared under these conditions that could ensure absence of stratification and floating oil under centrifuging at a speed of 3000 r/min for 30 min.
出处 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2011年第3期21-26,共6页 中国炼油与石油化工(英文版)
关键词 high-solid content silicone oil emulsion particle size EMULSIFICATION 液滴直径 甲基硅油 高固含量 乳液 影响因素 搅拌速度 乳化时间 乳化温度
  • 相关文献

参考文献2

二级参考文献14

  • 1李俊英,李天铎,张庆思,张改云.分光光度法测定叔氨基有机硅的含量[J].有机硅材料,2004,18(3):20-22. 被引量:6
  • 2臧传锋,林红,陈宇岳.纺织用有机硅的特点及其应用[J].纺织导报,2006(3):70-74. 被引量:14
  • 3何壮志,杨玲,林芳,李正军,张廷有.双亲硅油的乳化及其作为皮革手感剂的应用[J].中国皮革,2006,35(7):42-44. 被引量:11
  • 4张小燕,黄世强.有机硅微乳液的研究进展[J].高分子通报,2006(5):52-57. 被引量:20
  • 5聿松民 王一璐.有机硅合成及产品应用[M].北京:化学工业出版社,2000.410—413.
  • 6James F Hyde,Jack R Wehrly. Polymerization of organopolysiloxanes in aqueous emulsion [ P ]. US : 2891920,1959 -07 -23.
  • 7Somasundaran P, Somil C Mehta, Parag Purohit. Silicone emulsions [J]. Advances in Colloid and Interface Science,2006,128 -130: 103 - 109.
  • 8柴玉叶,兰云军,罗卫平,等.一种皮革加工过程用非离子油的制备方法[P].CN:101058835A,2007-10-24.
  • 9Chern C S, Chen Y C. Stability of the polymenzable surfactant stabilized Latex particle during semibatch emulsion poly2 merization [ J ]. Colloid & Polymer Sci, 1997, (2) : 124 - 130.
  • 10Blackley D C. Production of carboxylat2 ed latics by emulsion polymerization[ J]. Science and Technology of Polymer Colloids, 1983, ( 1 ) :203 - 219.

共引文献30

同被引文献22

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部