期刊文献+

Matrix Power Control Algorithm for Multi-input Multi-output Random Vibration Test 被引量:11

Matrix Power Control Algorithm for Multi-input Multi-output Random Vibration Test
原文传递
导出
摘要 Both auto-power spectrum and cross-power spectrum need to be controlled in multi-input multi-output (MIMO) random vibration test. During the control process with the difference control algorithm (DCA), a lower triangular matrix is derived from Cholesky decomposition of a reference spectrum matrix. The diagonal elements of the lower triangular matrix (DELTM) may become negative. These negative values have no meaning in physical significance and can cause divergence of auto-power spectrum control. A proportional root mean square control algorithm (PRMSCA) provides another method to avoid the divergence caused by negative values of DELTM, but PRMSCA cannot control the cross-power spectrum. A new control algorithm named matrix power control algorithm (MPCA) is proposed in the paper. MPCA can guarantee that DELTM is always positive in the auto-power spectrum control. MPCA can also control the cross-power spectrum. After these three control algorithms are analyzed, three-input three-output random vibration control tests are implemented on a three-axis vibration shaker. The results show the validity of the proposed MPCA. Both auto-power spectrum and cross-power spectrum need to be controlled in multi-input multi-output (MIMO) random vibration test. During the control process with the difference control algorithm (DCA), a lower triangular matrix is derived from Cholesky decomposition of a reference spectrum matrix. The diagonal elements of the lower triangular matrix (DELTM) may become negative. These negative values have no meaning in physical significance and can cause divergence of auto-power spectrum control. A proportional root mean square control algorithm (PRMSCA) provides another method to avoid the divergence caused by negative values of DELTM, but PRMSCA cannot control the cross-power spectrum. A new control algorithm named matrix power control algorithm (MPCA) is proposed in the paper. MPCA can guarantee that DELTM is always positive in the auto-power spectrum control. MPCA can also control the cross-power spectrum. After these three control algorithms are analyzed, three-input three-output random vibration control tests are implemented on a three-axis vibration shaker. The results show the validity of the proposed MPCA.
出处 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2011年第6期741-748,共8页 中国航空学报(英文版)
基金 National Natural Science Foundation of China (10972104) The Fundamental Research Funds for NUAA(NS2010007)
关键词 multi-input multi-output environmental testing vibration control random vibration auto-power spectrum cross-power spectrum multi-input multi-output environmental testing vibration control random vibration auto-power spectrum cross-power spectrum
  • 相关文献

参考文献8

二级参考文献66

  • 1严侠,朱长春,胡勇.三轴六自由度液压振动台系统建模研究[J].机床与液压,2006,34(11):93-95. 被引量:11
  • 2王述成,陈章位.随机振动试验中时域随机化技术的研究[J].机械工程学报,2005,41(5):230-233. 被引量:21
  • 3贺旭东,陈怀海,申凡,王刚,赵保平.双振动台随机振动综合控制研究[J].振动工程学报,2006,19(2):145-149. 被引量:24
  • 4格罗布GH.矩阵计算[M].大连:大连理工大学出版社,1988..
  • 5胡志强.随机振动试验应用技术[M].北京:中国计量出版社,1998..
  • 6韩俊伟,胡宝生,周明东,于丽明.地震模拟振动台初始状态调节和控制参数的匹配[J].地震工程与工程振动,1997,17(1):115-120. 被引量:4
  • 7Fisher D K.Theoretical and practical aspects of multiple-actuator shaker control[C] //43rd Shock and Vibration Bulletin.Wash.D C,1973:153-174.
  • 8Smallwood D O.Multiple shaker random control with cross-coupling[C] //Proceedings of the Institute of Environmental Sciences.[S.l.] :IES,1978:341-347.
  • 9Smallwood D O.Random vibration testing of a single test item with a multiple input control system[C] //Proceedings of the Institute of Environmental Sciences.Atlanta:IES,1982:42-49.
  • 10Smallwood D O,Woodall T D,Buksa E J.Minimum drive requirements for a multiple input multiple output linear system[C] //Proceedings of the Institute of Environmental Sciences.[S.l.] :IES,1986:295-301.

共引文献64

同被引文献42

引证文献11

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部