期刊文献+

Fluid structure interaction for circulation valve of hydraulic shock absorber 被引量:6

Fluid structure interaction for circulation valve of hydraulic shock absorber
下载PDF
导出
摘要 Based on the working principle and the damping characteristic of hydraulic shock absorber, a fluid structure interaction method was presented, which was used to analyze the microcosmic and high-frequency processing mechanism of fluid structure interaction between circulation valve and liquid of hydraulic shock absorber. The fluid mesh distortion was controlled by the CEL language, and the fluid struc^tre interaction mathematical model was established. The finite element model was established by ANSYS CFX software and was analyzed by dynamic mesh technique. The local sensitive computational area was meshed by prismatic grid, which could reduce the negative volume problem during the simulation. The circulation valve and liquid of hydraulic shock absorber were simulated and analyzed under the condition of sinusoidal inlet velocity loads. Flow characteristic and dynamics characteristic were obtained. The pressure distribution and the displacement of circulation value were obtained, and the acceleration curve of circulation valve was simulated and analyzed. The conformity of the final simulation results with the experimental datum indicates that this method is accurate and reliable to analyze the dynamics characteristic between circulation valve and liquid of hydraulic shock absorber, which can provide a theoretical foundation for optimizing hydraulic shock absorber in the future. Based on the working principle and the damping characteristic of hydraulic shock absorber,a fluid structure interaction method was presented,which was used to analyze the microcosmic and high-frequency processing mechanism of fluid structure interaction between circulation valve and liquid of hydraulic shock absorber.The fluid mesh distortion was controlled by the CEL language,and the fluid structure interaction mathematical model was established.The finite element model was established by ANSYS CFX software and was analyzed by dynamic mesh technique.The local sensitive computational area was meshed by prismatic grid,which could reduce the negative volume problem during the simulation.The circulation valve and liquid of hydraulic shock absorber were simulated and analyzed under the condition of sinusoidal inlet velocity loads.Flow characteristic and dynamics characteristic were obtained.The pressure distribution and the displacement of circulation value were obtained,and the acceleration curve of circulation valve was simulated and analyzed.The conformity of the final simulation results with the experimental datum indicates that this method is accurate and reliable to analyze the dynamics characteristic between circulation valve and liquid of hydraulic shock absorber,which can provide a theoretical foundation for optimizing hydraulic shock absorber in the future.
出处 《Journal of Central South University》 SCIE EI CAS 2013年第3期648-654,共7页 中南大学学报(英文版)
基金 Project(51275542) supported by the National Natural Science Foundation of China project(CDJXS12110010) supported by the Fundamental Research Funds for the Central Universities of China
关键词 hydraulic shock absorber circulation valve finite element method fluid structure interaction simulation analysis 流体结构相互作用 液压减震器 循环阀 动力学特性 相互作用机制 模拟过程 网格畸变 ANSYS
  • 相关文献

参考文献10

二级参考文献76

共引文献203

同被引文献68

  • 1舒红宇,王立勇,岑伊万.车辆液力减振器异常噪声鉴别方法[J].重庆大学学报(自然科学版),2005,28(4):10-13. 被引量:16
  • 2肖攀,黄恒,邓楚南.液压减振器的噪声与内部结构对应关系的探讨[J].汽车科技,2005(4):10-13. 被引量:5
  • 3杜学文,邹俊,傅新,冀宏,杨华勇.节流槽结构对气穴噪声的影响[J].浙江大学学报(工学版),2007,41(3):456-460. 被引量:23
  • 4Goncalves E. Numerical Study of Expansion Tube Problems: Toward the Simulation of Cavitation [ J]. Computers & Fluids, 2013 , 72: 1-19.
  • 5Margulis M A, Margulis I M. Luminescence Mechanism of Acoustic and Laser-Induced Cavitation[ J]. Acoustical Physics,2006 , 52(3) : 283-292.
  • 6Lind S J, Phillips T N. Bubble Collapse in Compressible Fluids Using a Spectral Element Marker Particle Method. Part 2. Viscoelastic Fluids [ J ]. International Journal for Numerical Methods in Fluids, 2013, 71(9) : 1103-1130.
  • 7Luo X W, Wei W, Ji B, et al. Comparison of Cavitation Prediction for a Centrifugal Pump with or without Volute Casing [ J1. Journal of Mechanical Science and Technology, 2013, 27 (6) : 1643-1648.
  • 8Kim S, MujTenhoff H. Measurement of Effective Bulk Modulus for Hydraulic Oil at Low Pressure [ J ]. Journal of Fluids Engineering—Transactions of the ASME, 2012, 134 ; 0212012.
  • 9Zhang L, Luo J, Yuan KB, et al. The CFD Analysis of Twin Flapper-Nozzle Valve in Pure Water Hydraulic [ J ]. ProcediaEngineering, 2012, 31; 220-227.
  • 10Berg A, Iben U, Meister A, et al. Modeling and Simulation of Cavitation in Hydraulic Pipelines Based on the Thermodynamic and Caloric Properties of Liquid and Steam [ J]. Shock Waves, 2005, 14(1/2) : 111-121.

引证文献6

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部