期刊文献+

Effect of Ti(C,N)Precipitation on Texture Evolution and Fish-Scale Resistance of Ultra-Low Carbon Ti-Bearing Enamel Steel 被引量:11

Effect of Ti(C,N)Precipitation on Texture Evolution and Fish-Scale Resistance of Ultra-Low Carbon Ti-Bearing Enamel Steel
原文传递
导出
摘要 The Ti(C,N)precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different morphologies of Ti(C,N)precipitate in hot strips.It is found that the Ti(C,N)precipitate in hot strip using Path 2(put into asbestos box and air cooled)are finer and much more in quantity than that in hot strip using Path 1(held at 730℃ for 30min and furnace cooled).The morphology of Ti(C,N)precipitate in hot strip has great effect on recrystallization texture in the subsequent cold-rolled annealed sheet.γ-fiber texture of strong recrystallization is gained in coldrolled and annealed sheet came from Path 1.On the contrary,in the one came from Path 2,theγ-fiber texture is weak.This may be due to the pinning force of numerous fine Ti(C,N)precipitate which retard the growth of preferential nucleated{111}orientated grains.Annealed steel sheets in the test came from both paths have excellent fishscale resistance. The Ti(C,N)precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different morphologies of Ti(C,N)precipitate in hot strips.It is found that the Ti(C,N)precipitate in hot strip using Path 2(put into asbestos box and air cooled)are finer and much more in quantity than that in hot strip using Path 1(held at 730℃ for 30min and furnace cooled).The morphology of Ti(C,N)precipitate in hot strip has great effect on recrystallization texture in the subsequent cold-rolled annealed sheet.γ-fiber texture of strong recrystallization is gained in coldrolled and annealed sheet came from Path 1.On the contrary,in the one came from Path 2,theγ-fiber texture is weak.This may be due to the pinning force of numerous fine Ti(C,N)precipitate which retard the growth of preferential nucleated{111}orientated grains.Annealed steel sheets in the test came from both paths have excellent fishscale resistance.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2013年第4期39-45,共7页
基金 Sponsored by National Natural Science Foundation of China(50527402) National Basic Research Program(973Program)of China(2011CB606306-2)
关键词 Ti(C N)precipitate texture fish-scale resistance ultra-low carbon enamel steel hydrogen diffusion coefficient Ti(C,N)precipitate texture fish-scale resistance ultra-low carbon enamel steel hydrogen diffusion coefficient
  • 相关文献

参考文献23

  • 1Yasuda A, Ito K, Ikehira J , et al. Production of Deep DrawingQuality Steel Sheets for Porcelain Enameling by ContinuousCasting [J]. Kawasaki Steel Technical Report, 1985(12): 45.
  • 2Valentini R, Solina A, Matera S. Influence of Titanium andCarbon Contents on the Hydrogen Trapping of MicroalioyedSteels [J]. Metallurgical and Materials Transactions, 1996,2?A: 3773.
  • 3Yuan X. Precipitates and Hydrogen Permeation Behavior in Ul-tra-Low Carbon Steel [J]. Materials Science and Engineering,2007,452-453A: 116.
  • 4Papp G,Geyer D, Giedenbacher G. Continuously Cast SteelSheet for Enamelling and Technical Properties of Hot and ColdRolled Sheet [j]. Viterous Enameller, 1990(41) : 71.
  • 5Inagki H. Fundamental Aspect of Texture Formation in LowCarbon Steel [J]. ISIJ International, 1994, 34(4) : 313.
  • 6Ray R K, Jonas J J, Hook R E. Cold Rolling and AnnealingTexture in Low Carbon and Extra Low Carbon Steels [J]. In-ternational Materials Reviews* 1994(39) : 129.
  • 7Nagataki Y,Hosoya Y. Origin of the Recrystallization TextureFormation in an Interstitial Free Steel [J]. ISIJ International,1996,36(4): 451.
  • 8Magnusson H , Jensen D J , Hutchinsson B. Growth Rates forDifferent Texture Components During Recrystallization of IFSteel [J]. Scripta Materialia, 2001(44) : 435.
  • 9Hayakawa Y,Szpunar J A. Modeling of Texture DevelopmentDuring Recrystallization of Interstitial Free Steel [J]. Acta Ma-terialia, 1997(45): 2425.
  • 10Hayakawa Y,Szpunar J A. A Comprehensive Model of Re-crystallization for Interstitial Free Steel [J]. Acta Materialia,1997(45): 3721.

同被引文献72

引证文献11

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部