期刊文献+

高压大流量直轴式柱塞泵缸体的设计与研究

R & D of High Pressure Large Flow Straight Axial Piston Pump
下载PDF
导出
摘要 讲述了用球墨铸铁替代传统复合结构材料设计高压柱塞泵缸体。通过对K3V112高压大流量柱塞泵的计算,验证了球铁作为缸体材料的可行性。对球铁进行气体软氮化可以得到具有良好的耐磨性、耐腐蚀性、耐热性和耐热粘附性的氮化物层,大大提高了缸体的性能。通过材料替代,简化了缸体的制造工艺,大大降低了制造成本并提高了生产效率与成品率。 States using nodular cast iron instead of traditional design of high pressure piston pump cylinder composite structure materials.Through to the K3V112 piston pump of high pressure and large flow calculation,verify the feasibility of nodular cast iron as cylinder material.Gas soft nitrogenization of nodular cast iron can retain good wear resistance,and corrosion resistance,and heat resistance,and heat-resistance adhesive nitride layer,greatly improves the performance of cylinder.Through the material substation simplify the manufacturing process of cylinder,and greatly reduce the manufacturing costs and increase the production efficiency and yield.
作者 徐天艺
出处 《液压气动与密封》 2014年第3期59-62,共4页 Hydraulics Pneumatics & Seals
关键词 高压大流量泵 直轴式柱塞泵 缸体 转子 球墨铸铁 软氮化 high pressure large flow pump straight axial piston pump cylinder pump rotor nodular cast iron trufftride
  • 相关文献

参考文献6

二级参考文献20

  • 1王继明.稀土、铜、硅对高硅耐酸铸铁铁耐酸性和机械性能的影响[J].铸造技术,1989(3):8-10. 被引量:4
  • 2周道光,金建平,郭大展,陆文华.Mn-Cu及Mn-Cr合金化对铸态球墨铸铁组织及性能的影响[J].铸造技术,1995,20(2):41-43. 被引量:1
  • 3程巨强,李少春.影响薄壁球墨铸铁白口倾向和球墨数量的因素分析[J].铸造技术,2007,28(3):323-325. 被引量:8
  • 4Misaka Yoshitaka, Kawasaki Kazuhiro. Komotori Jun. Fatigue strength of ferritic ductile cast iron hardened by super rapid induction heating and quenching [J].Materials Transactions,2004,45: 2930-2935.
  • 5Sunada Hisakichi, Fukaura Kenzo. Relationship between microstructure and impact strength offerritic ductile cast iron for cask use [J].Journal of the Society of Materials Science,1996, (45): 316-320.
  • 6Bosnjak B, Radulovic B, Pop-Tonev K. Influence of micro-alloying and heat treatment on the kinetics of bainitic reaction in austempered ductile iron [J].Journal of Materials Engineering and Performance,2001,( 10):203 -211.
  • 7RefaeyA, FatahallaN. Effect ofmicrostructure on properties of ADI and low alloyed ductile iron [J].Journal of Materials Science,2003, (38):351-362.
  • 8Li Zhenhua, Li Yanxiang. Effect of Sb on the graphite morphology and mechanical properties in heavy section ductile iron [J].Materials Science Forum, 2005,(5):2769-2772.
  • 9许仰曾,朱小明.液压行业经济与技术协调发展趋势[D].2003年国际流体传动技术及市场发展研讨会论文汇编.
  • 10李隆盛.铸造合金及熔炼[M].北京:机械工业出版社,1989..

共引文献542

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部