摘要
结冷胶是一种优良的微生物多糖。由于其具有极佳的稳定及悬浮效果,在含乳饮料及液态乳产品中的应用变得越来越广泛。本文通过对结冷胶,特别是针对高酰基结冷胶在含乳饮料及液态乳体系中的应用特性进行研究,结合我国乳业实际情况,探索结冷胶的性质及如何更加科学的使用结冷胶,进而促进结冷胶在含乳饮料及液态乳产品开发和实际生产中的应用。实验结果表明:结冷胶溶液保持90℃时间越长,其弹性模量和粘度下降越明显;结冷胶的弹性模量和粘度均随着巴氏杀菌温度的升高而降低;结冷胶在不同温度的配料水中分散会溶胀,在75℃左右溶胀到极点,表现为溶液粘度最高。如配料水温度继续上升,则溶液粘度又开始下降;随着回流次数的增加,高温杀菌时间的延长,弹性模量和粘度均呈明显的下降趋势。由实验结果可得,在实际生产过程中,应尽可能的降低结冷胶的受热程度。杀菌的参数应根据产品类别,在保证商业无菌的基础上,以较低的杀菌温度和较短的杀菌时间组合最佳。对于巴氏杀菌产品而言,75℃杀菌最适合,结冷胶的悬浮效果最佳。
Gellan gum is a kind of microbial polysaccharides. Because of its excellent stability and suspension effect,it is used widely in liquid milk products. The research focuses on application characteristics of gellan gum,especially a high acyl gellan gum,in liquid milk products. Based on China's dairy industry facts,this paper studies the properties of gellan gum and how to scientifically use it,in order to promote application levels of gellan gum in liquid milk.The experimental results showed that: 1The more time of gellan gum solution is maintained at 90℃,the more decrease of elastic modulus and viscosity will be. 2 Gellan gum elastic modulus and viscosity were decreased with increasing of the temperature of pasteurization. 3If the gellan gum dispersed in water of different temperatures it will swell and in 75℃ will go to extreme and showed that the highest viscosity. If temperature of the water used continue to raise,the viscosity start to decline. 4With the increase in the number of reflux,the elastic modulus and the viscosity will decrease obviously.Conclusions: In the actual production, the heating of gellan gum should be reduced as much as possible.Sterilization parameters should be, based on the products category and ensured commercial sterilization, the combination of lower temperature of sterilization and the shorter time of sterilization. For the pasteurized products,sterilization in 75℃ was best with gellan gum suspending very effectively.
出处
《饮料工业》
2015年第1期14-22,共9页
Beverage Industry
关键词
结冷胶
弹性模量
粘度
悬浮
gellan gum
elastic modulus
viscosity
suspension