期刊文献+

Impact Resistance of Reactive Powder Concrete 被引量:12

Impact Resistance of Reactive Powder Concrete
下载PDF
导出
摘要 The impact behaviour of three types of reactive powder concretes (RPC) was studied using the split Hopkinson press bar (SHPB) testing method. These RPC were prepared with steel fiber volume fraction of 0%, 3%, and 4%, respectively. The stress-strain relationship, strain rate sensitivity threshold value, dynamic strength increase factor, modulus of elasticity and failure pattern of these RPC specimens subjected to impact load were investigated. From the tests, the strain rate sensitivity threshold value of 50 s-1 was obtained. The experimental results showed that when the strain rate increased from the threshold value to 95 s-1, the maximum stress of RPC increased by about 20% and the modulus of elasticity of RPC increased by about 30%. The failure pattern of RPC specimens with steel fiber reinforcement was very different from that of the RPC matrix specimen when subjected to impact loading. Under similar impact loading rate, cracks developed in the steel fiber reinforced RPC specimens, whilst the RPC matrix specimens were broken into small pieces. The impact behaviour of three types of reactive powder concretes (RPC) was studied using the split Hopkinson press bar (SHPB) testing method. These RPC were prepared with steel fiber volume fraction of 0%, 3%, and 4%, respectively. The stress-strain relationship, strain rate sensitivity threshold value, dynamic strength increase factor, modulus of elasticity and failure pattern of these RPC specimens subjected to impact load were investigated. From the tests, the strain rate sensitivity threshold value of 50 s-1 was obtained. The experimental results showed that when the strain rate increased from the threshold value to 95 s-1, the maximum stress of RPC increased by about 20% and the modulus of elasticity of RPC increased by about 30%. The failure pattern of RPC specimens with steel fiber reinforcement was very different from that of the RPC matrix specimen when subjected to impact loading. Under similar impact loading rate, cracks developed in the steel fiber reinforced RPC specimens, whilst the RPC matrix specimens were broken into small pieces.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2015年第4期752-757,共6页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China(Nos.51478128,51278135 and 50708022) the Scientific and Research Developing Project of Ministry of Housing and Urban-Rural Development of China(2010-K3-27) the Guangzhou Government Higher Vocational Colleges&Schools Yang Cheng Scholar Funded Scheme(10A043G) the Foundation for Fostering the Scientific and Technical Innovation of Guangzhou University
关键词 split Hopkinson press bar (SHPB) steel fiber reactive powder concrete (RPC) impactcompression split Hopkinson press bar (SHPB) steel fiber reactive powder concrete (RPC) impactcompression
  • 相关文献

参考文献24

  • 1JIN FN, LIU L, ZHANG LP, et al. Development Of Projectiles and Their Penetration [J]. Journal of PLA University of Science and Technology (Natural Science Edition), 2002, 3(2): 34-40 (in Chinese).
  • 2DENG GQ, ZHOU ZS, ZHENG QP. Study Status Quo and Develop- ment Of Aggregated Effect of Multiple Earth Penetrator Bursts Detonated Simultaneously [J]. Journal of PLA University of Science and Technology (Natural Science Edition), 2002, 3(3): 45-49 (in Chinese).
  • 3JIAO C J. Study on Behaviour of HPSFRC and UHPSFRC Subjected to lmpact and Blast [D]. Nanjing: School of Materials Science and Engineering, Southeast University, 2004 (in Chinese).
  • 4HAO Y, HAO H, LI ZX. Influence of End Friction Confinement on Impact Tests of Concrete Material at High Strain Rate [J]. International Journal of Impact Engineering, 2013, 60(10): 82-106.
  • 5Giannopoulos G, Larcher M, Casadei F, et al. Risk Assessment of the Fatality due to Explosion in Land Mass Transport Infrastructure by Fast Transient Dynamic Analysis [J]. Journal of Hazardous Materials, 2010, 173(1-3): 401-408.
  • 6Halit Y, Engin D, Bulent B. The Effect of Autoclave Pressure, Tem- perature and Duration Time on Mechanical Properties of Reactive Powder Concrete[J].Construction and Building Materials, 2013, 42(5): 53-63.
  • 7刘娟红.Effects of Curing Systems on Properties of High Volume Fine Mineral Powder RPC and Appearance of Hydrates[J].Journal of Wuhan University of Technology(Materials Science),2010,25(4):619-623. 被引量:6
  • 8YI NH, JANG HJ, TONG SH, et al. Blast-Resistant Characteristics of Ultra-High Strength Concrete and Reactive Powder Concrete[J]. Construction and Building Materials, 2012, 28( 1): 694-707.
  • 9SkIN W, JIAO CJ. Experimental Study on Impact Tensile Behavior of Reactive Powder Concrete [J]. Journal Of Guangzhou University ( Natural Science Edition), 2011, 10(1): 42-47 (in Chinese).
  • 10陈智韬,杨英姿.Impact Properties of Engineered Cementitious Composites with High Volume Fly Ash Using SHPB Test[J].Journal of Wuhan University of Technology(Materials Science),2012,27(3):590-596. 被引量:10

二级参考文献22

  • 1P K Mehta. Influence of Fly Ash Characteristics on the Strength of Portland Fly Ash Mixture [J]. Cem. Concr Res., 1985, 15:669-674.
  • 2Kraiwood Kiattikomol, Chai Jaturapitakkul, Smith Songpiriyakij, et aL A Study of Ground Coarse Fly Ashes with Different Finenesses from Various Sources as Pozzolanic Materials [J]. Cem. Conc Compos., 2001:335-343.
  • 3Y S Tai. Uniaxial Compression Tests at Various Loading Rates for Reactive Powder Concrete [J]. Theor. Appl. Fract. Mech., 2009, 52: 14-21.
  • 4Dylmar Penteado Dias, Clelio Thaumaturgo. Fracture Toughness of Geopolymeric Concretes Reinforced with Basalt Fibers [J]. Cem. Concr. Compos., 2005, 27:49-54.
  • 5W M Li, J Y Xu. Impact Characterization of Basalt Fber Reinforced Geopolymeric Concrete Using a 100-ram-Diameter Split Hopkinson Pressure Bar [J]. Mater. Sci. Eng. A, 2009, 513-514:145-153.
  • 6W M Li, J Y Xu. Mechanical Properties of Basalt Fiber Reinforced Geopolymeric Concrete Under Impact Loading [J]. Mater. Sci. Eng. A, 2009, 505:178-186.
  • 7V C Li. Engineered Cementitious Composites-Tailored Composites through Micromechanical Modeling [C]. In: N Banthia, A A Bentur,and A Mufti, eds. Fiber Reinforced Concrete." Present and the Future, 1998.
  • 8V C Li. On Engineered Cementitous Composites (ECC): A Review of the Material and Its Applications [J]. J. Adv. Conct: Technol., 2003, 1(3): 215-230.
  • 9M D Lepech, V C Li. Long Term Durability Performance of Engineer- ed Cementitious Composites [J]. Int. J. Restor. Build Monum., 2006, 12(2): 119-132.
  • 10G Fischer, V C Li. Effect of Fiber Reinforcement on the Response of Structural Members [J]. Eng. Fract. Mech., 2007, 74:258-272.

共引文献14

同被引文献127

引证文献12

二级引证文献41

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部