摘要
In order to improve the absorbing properties of M- type barium ferrite absorbing materials, M-type barium ferrite/graphene oxide composites with different graphene oxide contents were synthesized by the sol-gel autocombustion method. X-ray diffraction （XRD）, a scanning electronic microscopy （ SEM ）, a physical properties measurement system （PPMS-9）, and a vector network analyzer were used to analyze their structure, surface morphology, magnetic and absorbing properties, respectively. The results show that the absorbing band of the composite absorbing material is widened and the absorbing strength is increased compared with the pure M-type barium ferrite. The sample with the content of doped graphene oxide of 3% has the minimum reflectivity at 10 to 18 GHz frequencies. Hence, the doped graphene oxide effectively improves the absorbing properties of M-type barium ferrite.
为了提高M型钡铁氧体吸波材料的吸波性能,通过溶胶-凝胶和自蔓延高温合成法制备了不同氧化石墨烯含量的M型钡铁氧体/氧化石墨烯复合吸波材料.借助X射线衍射仪、扫描电子显微镜、物理性能测试仪和矢量网络分析仪对M型钡铁氧体/氧化石墨烯复合吸波材料的晶体结构、表面形貌、磁性能和吸波性能分别进行了研究.研究表明：M型钡铁氧体/氧化石墨烯复合吸波材料的吸收频段不仅比M型钡铁氧体材料宽,而且吸收强度比M型钡铁氧体大,其中掺杂氧化石墨烯含量为3%的样品,在10~18 GHz的频率上,反射率最小.因此,加入氧化石墨烯有效地改善了M型钡铁氧体的吸波性能.
基金
The National Natural Science Foundation of China(No.51205282)
