期刊文献+

Study on the Servo Drive of PM-LSM to Be Used in Parallel Synchronous Drive 被引量:1

Study on the Servo Drive of PM-LSM to Be Used in Parallel Synchronous Drive
下载PDF
导出
摘要 Recently, linear motors can have high speed control, high acceleration-deceleration. So linear motors are widely used in industrial applications such as precision machine tools. In our laboratory focusing on transport system, we propose parallel synchronous drive of used the PM-LSM (permanent magnet linear synchronous motor). It can pass luggage without having to stop the working. When you establish "parallel synchronous drive", a motor follows the other motor. In our laboratory, one of the motors is called "master motor" and the other motor called "slave motor". The master motor's speed and position pass slave motor then establish parallel synchronous drive. Therefore, slave motor requires high-responsive and precision that follows the master motor. This paper focuses on the control of the slave motor.
出处 《Journal of Mechanics Engineering and Automation》 2015年第10期580-584,共5页 机械工程与自动化(英文版)
关键词 PM-LSM master-slave motor PI control parallel synchronous drive method. 同步驱动 伺服驱动 并行 直线永磁同步电机 直线电机 高速控制 工业应用 主电机
  • 相关文献

参考文献11

  • 1Azukizawa, T., Morimoto, M., Kanda, S., Tamura, N., and Yokoyama, T. 1989. "A Linear Induction Motor Control System for Magnetically Levitated Carrier System." 1EEE Trans. Veh. Technol. 38 (2): 102-8.
  • 2Jeon, S., Park, S., and Lee, J. 2006. "Dynamic Characteristics Analysis of 3D Conveyer System Linear Induction Motor for Control Algorithm Developments," Presented at the 12th Biennial IEEE Conf. on Electromagnetic Field Computation, Miami, USA.
  • 3Hall, D., Kapinski, J., Krefta, M., and Christianson, O. 2008. "Transient Electromechanical Modeling for Short Secondary Linear Induction Machines." IEEE Trans. Energy Conversion 23 (3): 789-95.
  • 4Azukizawa, T. 2003. "Status of Linear Drives in Japan." In Proc. of IEEJ Conf. on Linear Drives for Industry Applications, 12-9.
  • 5Seki, K., Watada, M., Torii, S., and Ebihara, D. 1997. "Discontinuous Arrangement of Long Stator Linear Synchronous Motor for Transportation System." In Proc. of lEEE PEDS 97 Conf., 697-702.
  • 6Kim, Y. J., Watada, M., Torii, S., and Ebihara, D. 2002. "A Study of the Discontinuous Armature Linear Synchronous Motor in Order to Decrease the Vibration." In Proc. of the International Conference on Electrical Engineering, 908-12.
  • 7Kim, Y. J., Dohmeki, H., and Ebihara, D. 2006. "Optimal Driving Method of Stationary Discontinuous Primary PM-LSM by Open-Loop Control." Electric Power Applications 153 (4): 585-91.
  • 8Kim, Y. J., and Dohmeki, H. 2007. "Cogging Force Verification by Deforming the Shape of the Outlet Edge at the Armature of a Stationary Discontinuous Armature PM-LSM." IEEE Trans. Magn. 43 (6): 2540-2.
  • 9Suzuki, K., Kim, Y. J., and Dohmeki, H. 2007. "Modelingabout the Discontinuous Armature Arrangement Interval of the Permanent Magnet Type Linear Synchronous Motor." In Proc. IEEE Conf. ICEMS 2007, 588-93.
  • 10Suzuki, K., Kim, Y. J., and Dohmeki, H. 2008. "Proposal of the Section Change Method of the Stator Block of the Discontinuous Stator Permanent Magnet Type LinearSynchronous Motor Aimed at Long-Distance Transportation." In Proc. 1EEE Conf. 1CEM 2008, 1-6.

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部