期刊文献+

Head Curvature of Pure Titanium Sheet Influenced by Process Parameters and Controlling in Hot Rolling Process 被引量:1

Head Curvature of Pure Titanium Sheet Influenced by Process Parameters and Controlling in Hot Rolling Process
下载PDF
导出
摘要 We investigated the influences of process parameters on the head curvature of pure titanium sheet in hot rolling process and proposed the controlling means. First, the thermal simulation experiments for pure titanium TA1 were carried out to investigate the hot deformation behaviors of pure titanium in the temperature range of 700-800 ℃ with strain rate range of 1-20 S-1, and the processing map was established to determine optimized deformation parameters. Then, the finite element model has been constructed and used to analyze the effect of process parameters on the direction and severity of head curvature of pure titanium sheet. The process parameters considered in the present study include workpiece temperature, work roll diameter, pass reduction, oxide scale thickness of workpiece surface, and interface friction coefficient. The simulation results show that the workpiece temperature and the interface friction coefficient are the two main factors. The proposed controlling means was carried out on a hot rolling production line and solved the head curvature problem effectively. The rolling practices indicate that the rolling yield is improved greatly. We investigated the influences of process parameters on the head curvature of pure titanium sheet in hot rolling process and proposed the controlling means. First, the thermal simulation experiments for pure titanium TA1 were carried out to investigate the hot deformation behaviors of pure titanium in the temperature range of 700-800 ℃ with strain rate range of 1-20 S-1, and the processing map was established to determine optimized deformation parameters. Then, the finite element model has been constructed and used to analyze the effect of process parameters on the direction and severity of head curvature of pure titanium sheet. The process parameters considered in the present study include workpiece temperature, work roll diameter, pass reduction, oxide scale thickness of workpiece surface, and interface friction coefficient. The simulation results show that the workpiece temperature and the interface friction coefficient are the two main factors. The proposed controlling means was carried out on a hot rolling production line and solved the head curvature problem effectively. The rolling practices indicate that the rolling yield is improved greatly.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2017年第2期444-450,共7页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China(51275445)
关键词 head curvature hot rolling process parameter thermal simulation pure titanium sheet head curvature hot rolling process parameter thermal simulation pure titanium sheet
  • 相关文献

参考文献8

二级参考文献37

  • 1李学通,杜凤山,王敏婷,张晓峰.板材轧制头部翘曲的非线性有限元研究[J].钢铁研究学报,2005,17(5):43-47. 被引量:7
  • 2马秋林,张莉,徐宏,王志文.工业纯钛TA2室温蠕变第1阶段特性研究[J].稀有金属材料与工程,2007,36(1):11-14. 被引量:18
  • 3H.E.斯克罗霍多夫.轧制原理[M].北京:中国工业出版社,1961.
  • 4Johnson G, Needham. Further Experiments in Asymmetrical Rolling [J]. International Journal of Mechanical Sciences,1966,8(3):443-455.
  • 5Dewhurst P, Collins I F, Johnson W. A theoretical and Experimental Investigation into Asymmetrical Hot Rolling [J]. International Journal of Mechanical Sciences,1974,16(2):389-397.
  • 6Collins I F, Dewhurst P. A slipline Field Analysis of Asymmetrical Hot Rolling [J]. International Journal of Mechanical Sciences,1975,17(4):643-651.
  • 7Salimi M, Sassani F. Modified Slab Analysis of Asymmetrical Plate Rolling [J]. International Journal of Mechanical Sciences,2002,44(9):1999-2023.
  • 8Jaroslaw M, Henryk D, Marcin K, et al. Theoretical Analysis of the Asymmetric Rolling of Sheets on Leader and Finishing Stands [J]. Journal of Materials Processing Technology,2003,138(1-3):183-188.
  • 9Knight C W, Hardy S J, Lees A W, et al. Investigation into the Influence of Asymmetric Factors and Rolling Parameters on Strip Curvature during Hot Rolling [J]. Journal of Materials Processing Technology,2003,134(2):180-189.
  • 10YEONG-MAW HWANG, GOW-YI TZOU. Analytical and Experimental Study on Asymmetrical Sheet Rolling [J]. Int J Mech Sci,1997,39(3) :289-303.

共引文献86

同被引文献7

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部