期刊文献+

Rationally designed/constructed MnO_x/WO_3 anode for photoelectrochemical water oxidation

Rationally designed/constructed MnO_x/WO_3 anode for photoelectrochemical water oxidation
原文传递
导出
摘要 Photoelectrocatalytic water splitting is an effective way to utilize the solar energy to solve the energy shortage. The valence band edge of WO3 located at 3V vs. normal hydrogen electrode(NHE), which can offer enough potential to kinetically oxidize water for oxygen evolution reaction. However, water oxidation reaction kinetics is sluggish when only WO3 is used as the photoanode. It is highly desirable to use cocatalyst to promote the kinetics. Mn Oxloaded on the WO3 photoanode through photodeposition methods improves the photoelectrochemical water oxidation performance. A maximum photocurrent density of composite photoanode is achieved with a deposition time of 3 min, which is higher than that of pristine WO3 photoanode around 40%. Mn O2 is not only a cocatalyst for water splitting but also for improving oxidation selectivity. We tried to use two means to load Mn Oxon WO3 photoanode material. It is observed that loading a moderate amount of Mn Oxon the WO3 by photodeposition can promote the performance of the WO3 photoanode. Photoelectrocatalytic water splitting is an effective way to utilize the solar energy to solve the energy shortage. The valence band edge of WO3 located at 3V vs. normal hydrogen electrode(NHE), which can offer enough potential to kinetically oxidize water for oxygen evolution reaction. However, water oxidation reaction kinetics is sluggish when only WO3 is used as the photoanode. It is highly desirable to use cocatalyst to promote the kinetics. Mn Oxloaded on the WO3 photoanode through photodeposition methods improves the photoelectrochemical water oxidation performance. A maximum photocurrent density of composite photoanode is achieved with a deposition time of 3 min, which is higher than that of pristine WO3 photoanode around 40%. Mn O2 is not only a cocatalyst for water splitting but also for improving oxidation selectivity. We tried to use two means to load Mn Oxon WO3 photoanode material. It is observed that loading a moderate amount of Mn Oxon the WO3 by photodeposition can promote the performance of the WO3 photoanode.
出处 《Chinese Chemical Letters》 SCIE CAS CSCD 2018年第6期811-814,共4页 中国化学快报(英文版)
基金 financially supported by the National Natural Science Foundation of China (Nos. 21173105, 21773096) Fundamental Research Funds for the Central Universities (No. lzujbky2016-k08) Open fund by Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control (No. KHK1701) the Natural Science Foundation of Gansu (No. 17JR5RA186)
关键词 Photoelectrochemical water oxidation Tungsten oxide Manganese oxide PHOTODEPOSITION Hydrothermal method Photoelectrochemical water oxidation Tungsten oxide Manganese oxide Photodeposition Hydrothermal method
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部