期刊文献+

拉瓦尔喷管喉部区域当量直径液力测量方法 被引量:1

Hydraulic Measurement Method for Equivalent Diameter of Laval Nozzle Throat
下载PDF
导出
摘要 拉瓦尔喷管喉径尺寸要求严格,现有成熟的深孔测量方法无法直接应用于拉瓦尔喷管喉部区域当量直径测量。在分析拉瓦尔喷管喉部区域当量直径液力测量的孔口流动模型基础上,提出了基于芯型测头塞规法的拉瓦尔喷管喉部区域当量直径液力测量方法,分析了芯型测头塞规尺寸与孔口流动模型及其相对灵敏度的关系。优选了短孔模型作为拉瓦尔喷管喉部区域当量直径液力测量的基本模型,确定了当量直径液力测量参数,研制了当量直径液力测量原型装置。在该装置上进行了测量试验,分析了芯型测头塞规直径和测量压差对喉部区域过流流量的影响。最终的重复性试验结果表明,该方法的测量重复性误差为±0.001 8 mm,能够满足拉瓦尔喷管喉部区域当量直径测量需要。 The requirements of Laval nozzle size are quite strict, and the existing measurement methods can not be used to measure the equivalent diameter of Laval nozzle throat directly. A hydraulic measurement method for measuring the equivalent diameter of Laval nozzle throat based on the core plug gauge is proposed through the analysis of the orifice flow of the throat’s equivalent diameter measurement model. The relationships among the plug gauge size, orifice flow model and its relative sensitivity are analyzed. On this basis, the short orifice flow model is taken as the model for measuring the equivalent diameter of throat. The measurement parameters are determined, and a measurement prototype device is developed. The repeatability error of the proposed measurement method is ±0.001 8 mm.
作者 张翔 孙晓红 潘旭东 王广林 ZHANG Xiang;SUN Xiao-hong;PAN Xu-dong;WANG Guang-lin(School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,Heilongjiang,China;CNC Machining Division,Aerosun Corporation,Nanjing 210006,Jiangsu,China)
出处 《兵工学报》 EI CAS CSCD 北大核心 2018年第6期1125-1131,共7页 Acta Armamentarii
基金 航天科学技术基金项目(2017年)
关键词 拉瓦尔喷管 当量直径 芯型测头塞规 液力测量 Laval nozzle equivalent diameter core plug gauge hydraulic measurement
  • 引文网络
  • 相关文献

参考文献6

二级参考文献29

  • 1姜杭毅,蔡元龙.用于边缘检测的Laplace——样条(▽~2S)算子[J].中国科学(A辑),1989,20(10):1113-1120. 被引量:11
  • 2K. Ziaei and N. Sepehri. Modeling and identification of electrohydraulic servos[ J]. Mechatronics, 2000(10) :761 -772.
  • 3M. Rucki, B. Barisic and T. Szalay. Analysis of air gage inaccuracy caused by flow instability [ J ]. Measurement, 2008, 41(6) :655 -661.
  • 4S. A. Farooqui, T. Doiron and C. Sahay. Uncertainty analysis of eylindricity measurements using bootstrap method [ J ]. Measurement, 2009,42(4) :524 - 531.
  • 5Y.Z. Lao, H.W. Leong, F.P. Preparata, G. Singh. Accurate cylindricity evaluation with axis-estimation preprocessing [ J ]. Precision Engineering, 2003,27:429 - 437.
  • 6刘福生,机床,1988年,7期,23页
  • 7陶钢.非均匀超音速流中的三流结构:[博士学位论文].俄罗斯,圣彼德堡:波罗地海国立技术大学,2000.
  • 8усковВН.Ударныеволныиихвзаимодействие.Л: ИздвоЛМИ,1980,46-90
  • 9Henderson L F, Lozzi A.Experiments on transition of Mach reflection.J Fluids Mech, 1975,68(1):139~155
  • 10АдриановАЛ, СтарыхАЛ, УсковВН.Интерференциястационарныхгазодинамиче-скихразрывов.Новосибирск: ВОНаука.Сибирскаяиздательскаяфирма,1995.30-36

共引文献32

同被引文献8

引证文献1

二级引证文献1

;
使用帮助 返回顶部