期刊文献+

基于键图的复杂机电系统模块化自动建模及仿真 被引量:1

Modularization Modeling and Simulating of Complex Mechatronic System Based on Bond Graph
下载PDF
导出
摘要 将键合图与模块化理论相结合,建立了一个开放式的机电系统模块库,并在此基础上建立了一个典型复杂机电系统——高速轧机的全局耦合动力学模型;模块的物理模型和数学模型统一,因而可方便地自动生成系统的数学模型;模块可拆卸,拼装以适用于不同类型的轧机。此方法也可用于其他复杂机电系统的动力学建模和分析。 An open mechatronic module library is established by uniting the theories of bond graph and modularization,and based on it a typical complex mechatronic - a global coupling dynamic model of a highspeed temper mill system is established,Since the physical model and the mathematical model are uniform, the model can be established automatically; the modules can be taken down or spliced conveniently for different rolling mill systems. The proposed method may be applied to dynamic modeling and analysis of other complex mechatronic systems.
出处 《株洲工学院学报》 2002年第6期58-61,共4页 Journal of Zhuzhou Institute of Technology
基金 国家自然科学基金资助项目(59835170)
关键词 复杂机电系统 仿真 键合图 模块化 自动生成 耦合建模 高速轧机 全局耦合动力学模型 bond graph modularization automatic modeling couple modeling
  • 引文网络
  • 相关文献

参考文献8

二级参考文献15

  • 1陈家瑞,林逸,刘明科,彭彦宏.键合图理论在汽车振动分析中的应用[J].汽车工程,1993,15(1):26-33. 被引量:7
  • 2孙靖民.机械优化设计[M].北京:机械工业出版社,1996..
  • 3姜慧.计算机辅助机床模块化方案设计的理论和实践.天津大学博士学位论文[M].,1998..
  • 4D.C.卡诺普 胡大宏等(译).系统动力学-应用键合图方法[M].机械工业出版社,1985..
  • 5薛定宇,控制系统计算机辅助设计MATLAB语言及应用,1996年
  • 6孙靖民,机械化化设计,1996年
  • 7潘亚东,键合图概论—一种系统动力学方法,1990年
  • 8胡大宏(译),系统动力学应用键合图方法,1985年
  • 9陈光耀,上海工业大学学报,1986年,4期,55页
  • 10姜华,周济,王春和,余俊.机械装配设计的关键技术[J].华中理工大学学报,1997,25(4):50-52. 被引量:5

共引文献78

同被引文献4

引证文献1

二级引证文献2

;
使用帮助 返回顶部