期刊文献+

Research on Influence Mechanism of Transmission Accuracy for Harmonic Drive Mechanism Considering Multi-factor Coupling

下载PDF
导出
摘要 The influence mechanism of transmission accuracy for harmonic drive mechanism considering multi-factor coupling was studied. According to analysis of influence factors of transmission accuracy for harmonic drive mechanism, it was obtained that the transmission errors of harmonic drive mechanism include processing errors and installation errors. The transmission error is produced by eccentric vector, it directly affects the rotation angle of output shaft and it makes harmonic drive mechanism produce backlash. Then analyze the movement error caused by the rigid wheel machining error, the flexible wheel machining error, the assembly error of the rigid wheel and the flexible wheel, the wave generator component, and the comprehensive expression method of motion error generated by each error source was obtained. The performance test device of space drive mechanism was used to test, and the law of the transmission accuracy of harmonic drive mechanism with temperature, speed and assembly clearance was obtained. The test results show that the transmission accuracy of harmonic drive mechanism decreases with increasing temperature, and the speed has little effect on the transmission accuracy of harmonic drive mechanism;the assembly quality has a significant impact on harmonic drive accuracy.
出处 《Mechanical Engineering Science》 2021年第1期6-11,共6页 机械工程(英文)
  • 引文网络
  • 相关文献

参考文献2

二级参考文献23

  • 1孙京,马兴瑞,于登云.星载天线双轴定位机构指向精度分析[J].宇航学报,2007,28(3):545-550. 被引量:40
  • 2田浩,赵阳,孙京,魏承.双轴定位点波束天线波束指向计算[J].宇航学报,2007,28(5):1215-1218. 被引量:10
  • 3马兴瑞,于登云,孙京,胡成威.空间飞行器展开与驱动机构研究进展[J].宇航学报,2006,27(6):1123-1131. 被引量:60
  • 4PALMGREN A. Ball and roller bearing engineering[M]. Burbank: Philadephia, 1959.
  • 5角田和雄.玉軸受の摩擦凳生機構(1)[J].机構學,1965(2):645-648.
  • 6角田和雄.玉軸受の摩擦凳生機構(2)[J].机構學,1965(3):645-648.
  • 7SNARE B. Rolling resistance in lightly loaded bearings[J].The Ball Bearing Journal, 1968, 152: 3-8.
  • 8SNARE B. Rolling resistance in loaded roller bearings[J]. The Ball Bearing Journal, 1968, 153: 19-24.
  • 9SNARE B, ENG G Rolling resistance in loaded ball contacts [J]. The Ball Bearing Journal, 1968, 154: 3-14.
  • 10TODD M J, STEVENS K T. Frictional torque of angular contact ball bearings with different conformities[R]. Risley: Technical Report ESA-CR(P)-1221, 1978.

共引文献101

;
使用帮助 返回顶部