摘要
Starch is one of the richest natural polymers with low-cost,non-toxic and biodegradable,but is seldom directly used as corrosion inhibitor due to its poor inhibitive ability and low water solubility.To solve this problem,cassava starch-acryl amide graft copolymer(CS-AAGC)was prepared through grafting acryl amide(AA)with cassava starch(CS),and it was firstly examined as an efficient inhibitor for 1060 aluminum in 1.0 mol·L^(-1)H_(3)PO_(4) media.The adsorption behavior of CS-AAGC and its electrochemical mechanism were investigated by weight loss and electrochemical methods.Additionally,the inhibited aluminum surface was fully characterized by a series of SEM,AFM,contact angle measurements and XPS.Results confirm that CS-AAGC performs better inhibitive ability than CS,AA or CS/AA mixture,and the maximum inhibition efficiency of 1.0 g·L^(-1)CS-AAGC is 90.6%at 20℃.CS-AAGC acts as a mixed-type inhibitor while mainly retards the anodic reaction.EIS has three time constants,and the polarization resistance is significantly increased in the presence of CS-AAGC.The micrograph of inhibited aluminum surface is of hydrophobic nature with low surface roughness and little corrosion degree.
基金
Funding support from the National Natural Science Foundation of China(51561027)
Training Programs of Young and Middle Aged Academic and Technological Leaders in Yunnan Province(2015HB049,2017HB030)
Special Project of''Top Young Talents”of Yunnan Ten Thousand Talents Plan(51900109)。
