Enhancing strength and ductility of AlSi10Mg fabricated by selective laser melting by TiB_(2)nanoparticles

In the metallic components fabricated by the emerging selective laser melting(SLM)technology,most strategies used for strengthening the materials sacrifice the ductility,leading to the so-called strengthductility trade-off.In the present study,we report that the strength and ductility of materials can be enhanced simultaneously by introducing nanoparticles,which can break the trade-off of the metallic materials.In the case of in-situ nano-TiB_(2)decorated AlSi10Mg composites,the introduced nanoparticles lead to columnar-to-equiaxed transition,grain refinement and texture elimination.With increasing content of nanoparticles,the strength increases continually.Significantly,the ductility first increases and then decreases.Our results show that the ductility is controlled by the competition between the crack-induced catastrophic fracture and ductile fracture associated with dislocation activities.The first increase of ductility is mainly attributed to the suppression of crack-induced catastrophic fracture when TiB_(2)nanoparticles present.With the further increase of TiB_(2)nanoparticles,the subsequent decrease of ductility is mainly controlled by dislocation activities.Thus,the materials will exhibit the optimum strength and ductility combination in a certain range of TiB_(2)nanoparticles.This study clarifies the physical mechanism controlling ductility for nano-TiB_(2)decorated Al Si10Mg composites,which provides the insights for the design of structural materials.