期刊文献+

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

下载PDF
导出
摘要 AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron sputtering.The coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to top.The surface of the deposited coatings is flat without obvious defects.The absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is 9.96.After heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the coatings.The absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is 0.0335.The coatings do not fail under this condition and have certain thermal stability.
作者 闵捷 YUAN Wenxu CHEN Yufei LAN Yapeng YAN Mengdi LIU Hanze CHENG Xudong 代路 MIN Jie;YUAN Wenxu;CHEN Yufei;LAN Yapeng;YAN Mengdi;LIU Hanze;CHENG Xudong;DAI Lu(Hubei Provincial Key Laboratory of Green Materials for Light Industry,Hubei University of Technology,Wuhan 430068,China;Col-laborative Innovation Center of Green Light-weight Materials and Processing,Hubei University of Technology,Wuhan 430068,China;School of Materials and Chemical Engineering,Hubei University of Technology,Wuhan 430068,China;School of Industrial Design,Hu-bei University of Technology,Wuhan 430068,China;State Key Laboratory of Advanced Technology for Materials Synthesis and Process-ing,Wuhan University of Technology,Wuhan 430070,China;Science and Technology on Thermal Energy and Power Laboratory,Wuhan Second Ship Design&Research Institute,Wuhan 430205,China)
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第4期854-862,共9页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China(No.52002159) the Open Foundation of Hubei Provincial Key Laboratory of Green Materials for Light Industry(No.201611B12) the Open Fund of Science and Technology on Thermal Energy and Power Laboratory(No.TPL2018A03)。
  • 相关文献

参考文献5

二级参考文献38

  • 1马志军,杨延清,朱艳,陈彦.连续纤维增强钛基复合材料热残余应力的研究进展[J].稀有金属材料与工程,2004,33(12):1248-1251. 被引量:11
  • 2黄斌,杨延清.金属基复合材料中热残余应力的分析方法及其对复合材料组织和力学性能的影响[J].材料导报,2006,20(F05):413-415. 被引量:11
  • 3McDonald GE. Spectral Reflectance Properties of Black Chrome for Use as a Solar Selective Coating[J]. Solar Energy, 1975, 17(2): 119-122.
  • 4Andersson A, Hunderi O, Granqvist CG. Nickel Pigmented Anodic Aluminum Oxide for Selective Absorption of Solar Energy [J]. Journal of Applied Physics, 1980, 51(1): 754-764.
  • 5Zhao S, Ribbing CG, Wackelgard E. Optical Constants of Sputtered Ni/NiO Solar Absorber Film-depth-profiled Characterization [J]. Solar Energy Materials and Solar Cells, 2004, 840-4): 193-203.
  • 6Katumba G, Olumekor L, Forbes A, et al. Optical, Thermal and Structural Characteristics of Carbon Nanoparticles Embedded in ZnO and NiO as Selective Solar Absorbers [J]. Solar Energy Materials and Solar Cells, 2008, 92(10): 1 285-1 292.
  • 7Martin P J, Netterfield RP, Sainty WG, et al. The Preparation and Characterization of Optical Thin Films Produced by Ion-assisted Deposition[J]. Journal of Vacuum Science and Technology, 1984, A 2(2): 341-345.
  • 8Zhang QC. Stainless-steel-A1N Cermet Selective Surfaces Deposited by Direct Current Magnetron Sputtering Technology[J]. Solar Energy Materials and Solar Cells, 1998, 52(1-2): 95i06.
  • 9Zhang QC, Shen YG. High Performance W-A!N Cermet .Solar Coatings Designed by Modelling Calculations and Deposiied by DC Magnetron Sputtering[J]. Solar Energy Materials and Solar Cells, 2004, 81(1): 25-37.
  • 10Zhao S, Wackelgard E. The Optical Properties of Sputtered Composite ofAI-AIN [J]. Solar Energy Materials and Solar Cells, 2006, 90(13): 1 861-1 874.

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部