期刊文献+

大孔磺酸树脂固载AlCl_3用于噻吩与烯烃的烷基化反应 被引量:21

Alkylation Reaction of Thiophene with Olefins over Acid Catalyst of AlCl_3 Supported Resins
下载PDF
导出
摘要 大孔磺酸树脂固载AlCl3是提高树脂催化剂酸强度及其烷基化活性的有效方法,本工作以NKC9, CT175两种磺酸树脂催化剂为载体,采用AlCl3气相固载法分别于不同固载温度及固载时间条件下制得AlCl3-NKC9, AlCl3-CT175催化剂,并对其用于噻吩与异丁烯、异戊烯的烷基化反应活性进行了考察. 结果表明:在固载时间为10~25 h、固载温度为110~120oC条件下,所制得的催化剂在常压、温度60oC、原料(含4300 mg/L噻吩的苯溶液)质量空速为7.5 h-1的反应条件下具有很高的噻吩烷基化活性(噻吩转化率达95%),且固载AlCl3后的树脂催化剂活性稳定性较固载前有较大程度提高. AlCl3NKC9, AlCl3CT175 super acid catalysts were prepared by AlCl3 gas-phase immobilization on NKC9, CT175 sulphoacid resins, and the conditions of different immobilization temperatures and different immobilization time were investigated. The catalyst抯 activities of the alkylation reaction of thiophene with olefins were studied. As a results, AlCl3NKC9, AlCl3CT175 super acid catalysts prepared at 110~120oC and immobilization 10~25 h showed excellent alkylation activities, and more than 95% conversion ratio of thiophene was obtained under normal pressure, 60oC, with WHSV 7.5 h1 (containing 4300 mg/L of thiophene in benzene), and the activity stabilities were improved greatly.
出处 《过程工程学报》 CAS CSCD 北大核心 2003年第1期18-23,共6页 The Chinese Journal of Process Engineering
基金 中国石油化工集团公司科技开发基金资助项目(编号: x430010)
关键词 磺酸树脂 固载 ALCL3 噻吩 烷基化反应 脱硫 sulphoacid resin immobilization AlCl3 thiophene alkylation reaction desulphurization
  • 引文网络
  • 相关文献

参考文献4

二级参考文献9

  • 1李鹏飞,庞先燊.在离子交换树脂上负载AlCl_3的固体超强酸催化剂的研制[J].精细石油化工,1993,10(1):17-20. 被引量:13
  • 2唐薰 张新胜.大孔磺酸树脂为载体的超强酸催化剂的合成[J].石油化工,1986,(10):591-591.
  • 3Xu T,J Am Chem Soc,1997年,119卷,12231页
  • 4Cai T,Appl Catal A:Ceneral,1993年,97卷,113122页
  • 5OLAHGA PRACASHGK.Superacid[J].Science,1979,(13):206-206.
  • 6GATES B C, SCHOIT G C A. A Superacid Polymer Catalyse[J].Che mCommun,1976,(10):342.
  • 7吉林大学化学系《催化作用编写组》.催化作用基础[M].北京:科学出版社,1980.
  • 8全国化学试剂产品目录编写组.全国化学试剂产品目录[M].北京:化学工业出版社,1979.
  • 9WEAST R C.Handbook of Chemistry and Physics[M].63th ed. Flo rida:CRC pressInc,1982-1983.

共引文献39

同被引文献215

引证文献21

二级引证文献116

相关主题

;
使用帮助 返回顶部