几种料位计在双膛窑的应用

A variety of level gauges are used in two-shaft kiln

依据双膛窑生产工况,采用合适的料位检测仪表,检测和控制窑体的物料平衡,是保证双膛窑连续稳定生产的必要条件。在生产过程中,通过雷达料位计监控窑前仓石料的料位,保证原料的稳定供应;窑顶重锤料位计对预热区料面的实时探测,保证窑体的料面始终保持在设定的高度;安装在窑底的倾斜开关探测着卸料仓的料位,保证煅烧好的成品灰及时的通过窑底振动给料机排至窑底成品皮带机,通过成品皮带机输送到成品车间。正确的料位计选型及测量数据的准确直接影响着双膛窑的正常生产,最大化地实现双膛窑的效益。

According to the production conditions of the two-shaft kiln,it is necessary to ensure the continuous and stable production of the two-shaft kiln by using appropriate material level detection instruments to detect and control the material balance of the kiln body.In the production process,the level of the stone in the warehouse in front of the kiln is monitored by the radar level meter to ensure the stable supply of raw materials.The real-time detection of the material surface of the preheating zone by the hammer level meter at the top of the kiln ensures that the material surface of the kiln body is always maintained at the set height.The tilt switch installed at the bottom of the kiln detects the material level of the discharge bin to ensure that the calcined finished ash is discharged to the finished product belt conveyor at the bottom of the kiln through the vibrating feeder at the bottom of the kiln in time,and is transported to the finished product workshop through the finished product belt conveyor.The correct selection of level gauge and the accuracy of measurement data directly affect the normal production of the two-shaft kiln and maximize the benefits of the two-shaft kiln.