期刊文献+

面向WIA-FA网络下行传输的灵活可靠重传方法

Flexible and Reliable Retransmission Method for Downlink Transmissions in WIA-FA Networks
原文传递
导出
摘要 针对恶劣射频环境下的大规模WIA-FA(industrial wireless network for industrial automation-factory automation)网络可靠传输问题,提出了一种面向WIA-FA网络下行数据传输的灵活可靠重传方法(flexible and reliable downlink retransmission,FRDR)。首先,设计一种新型超帧结构以支持循环重传和按需重传的混合重传模式。其次,分别对循环重传与按需重传两种重传模式进行了可靠性建模,网关基于分析结果动态选择更可靠的重传模式进行数据传输。最后,通过大量仿真验证了FRDR相比于传统的重传方法的可靠性优势。 Massive industrial wireless networks for industrial automation-factory automation(WIA-FA)networks in hostile radio frequency environments are associated with unreliable transmission.Hence,to resolve this issue,we propose a flexible and reliable downlink retransmission(FRDR)method for downlink transmission in WIA-FA networks.For this,we first design a novel superframe architecture that supports a hybrid cyclic/on-demand retransmission mode.Second,we perform reliability modeling to cyclic retransmission mode and on-demand retransmission mode.The obtained analysis results facilitate the selection of a more reliable retransmission scheme dynamically.Finally,the results of extensive simulations validate the reliability advantage of FRDR over the existing retransmission methods.
作者 赵永恒 郑萌 梁炜 ZHAO Yongheng;ZHENG Meng;LIANG Wei(State Key Laboratory of Robotics,Shenyang Institute of Automation,Chinese Academy of Sciences,Shenyang 110016,China;Key Laboratory of Networked Control Systems,Chinese Academy of Sciences,Shenyang 110016,China;Institutes for Robotics and Intelligent Manufacturing,Chinese Academy of Sciences,Shenyang 110169,China;University of Chinese Academy of Sciences,Beijing 100049,China)
出处 《信息与控制》 CSCD 北大核心 2023年第4期504-513,524,共11页 Information and Control
基金 国家重点研发计划(2021YFB3301000) 国家自然科学基金(62022088) 中国科学院对外合作重点项目(173321KYSB20200002) 辽宁省自然科学基金(2019-YQ-09) 沈阳市中青年科技创新人才支持计划(RC210482,RC210314)
关键词 工业自动化 工业无线网络 可靠通信 重传方法 下行传输 industrial automation industrial wireless network reliable communication retransmission downlink transmission
  • 相关文献

参考文献3

二级参考文献32

  • 1Cutler C R, Perry R T. Real time optimization with multivariable control is required to maximize profits. Computers and Chemical Engineering, 1983, 7(5):663-667.
  • 2Chai T Y, Ding J L, Wu F H. Hybrid intelligent control for optimal operation of shaft furnace roasting process. Control Engineering Practice, 2011, 19(3):264-275.
  • 3Findeisen W, Bailey F N, Bryds M, Malinawski K, Tatjewski P, Wozniak A. Control and Coordination in Hierarchical Systems. New York:John Wiley & Son, 1980.
  • 4Chai T Y, Zhao L, Qiu J B, Liu F Z, Fan J L. Integrated network-based model predictive control for setpoints compensation in industrial processes. IEEE Transactions on Industrial Informatics, 2013, 9(1):417-426.
  • 5Liu F Z, Gao H J, Qiu J B, Yin S, Fan J L, Chai T Y. Networked multirate output feedback control for setpoints compensation and its application to rougher flotation process. IEEE Transactions on Industrial Electronics, 2014, 61(1):460-468.
  • 6Wang T, Gao H J, Qiu J B. A combined adaptive neural network and nonlinear model predictive control for multirate networked industrial process control. IEEE Transactions on Neural Networks and Learning Systems, 2016, 27(2):416-425.
  • 7Jiang Y, Fan J L, Chai T Y, Chen T W. Setpoint dynamic compensation via output feedback control with network induced time delays. In:Proceedings of the 2015 American Control Conference. Chicago, IL:IEEE, 2015.5384-5389.
  • 8Perera C, Zaslavsky A, Christen P, Georgakopoulos D. Sensing as a service model for smart cities supported by internet of things. Transactions on Emerging Telecommunications Technologies, 2014, 25(1):81-93.
  • 9Xu L D, He W, Li S C. Internet of things in industries:a survey. IEEE Transactions on Industrial Informatics, 2014, 10(4):2233-2243.
  • 10Gungor V C, Hancke G P. Industrial wireless sensor networks:challenges, design principles, and technical approaches. IEEE Transactions on Industrial Electronics, 2009, 56(10):4258-4265.

共引文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部