3Katsundo H. Manufactruing systems engineering[M]. London : Taybr &Francis, 1996.
4WrightPK.21世纪制造[M].北京:清华大学出版社,2004.
5SHIN H, PARK E S. Analysis of crack phenomenon for in- jection-molded screw using moldflow simulation [ J ] , J Appl Polym Sci, 2009, 113 (4) : 2702 -2708.
6DENG Y M, ZHENG D. Minimizing the thicknesses of in- jection-molded plastic parts based on a moldflow simulation [J]. Stroj Vestn-J Mech Eng, 2007, 53 (7 -8): 503 -518.
7塑料模设计手册编写组.料模设计手册[M].北京:机械工业出版社,2002.
8YANG J K. Analysis and optimization of plastic parts mold- flow based on mold flow [J]. Adv Mater Res, 2013, 709: 262 - 265.
9LI N, LIU H B, WU H T. The deformation analysis and op- timization of the injection molded parts based on the moldflow and minitab software [ J]. Adv Mater Res, 2013, 753: 1180 - 1183.
10SHIN H, PARK E S. Analysis of incomplete filling defect for injection-molded air cleaner cover using moldflow simula- tion [J/OL]. JPolym, 2013, 2013:1-13 (2013-05 - 21 ) [ 2013 - 06 - 10 ]. http : //www. hindawi, corn/ joumals/jpol/2013/720209/.
