摘要
室内模拟配制三元复合驱采出液,利用TURBISCAN稳定性分析仪考察了不同乳化条件下模拟乳状液的稳定性,最终确定W/O乳状液的最佳乳化条件为乳化时间12min、乳化转速3000rpm、乳化温度58℃,且随着含水率的增大,乳状液稳定性变差,固体粒子的存在增加了乳状液稳定性。
Ternary compound flooding simulated production fluid was prepared in the room,using TURBISCAN stability analyzer examines the simulation under the conditions of different emulsion stability of the emulsion,Finally,the optimal emulsifying conditions of W/O emulsion were determined as follows:emulsifying time 12min,emulsifying speed 3000rpm,emulsifying temperature 58℃,With the increase of water content,the stability of emulsion becomes worse,and the presence of solid particles increases the stability of emulsion.
作者
单秀华
SHAN Xiu-hua(Department of Petroleum Engineering,Cheng De Petroleum College,Chende,Hebei,067000)
出处
《内蒙古石油化工》
CAS
2020年第1期10-12,共3页
Inner Mongolia Petrochemical Industry
基金
河北省高等学校社科研究2019年度基金项目:QN2018127
关键词
三元复合驱
乳状液
稳定性
含水率
固体粒子
Triple flooding
Emulsion
Stability
The moisture content
The solid particles
