期刊文献+

湿式双离合器扭矩传递特性对换挡品质影响的研究 被引量:4

Research on the Influence of Torque Characteristics of Wet Double Clutch on Shift Quality
下载PDF
导出
摘要 湿式双离合变速器中离合器扭矩传递模型的精准度将直接影响其控制效果。本文通过建立包含粘性扭矩和粗糙扭矩的湿式双离合器扭矩传递模型,分析温度及主从动盘转速差对离合器扭矩传递特性的影响,并将其嵌入到搭载湿式双离合器的整车模型中,研究了扭矩传递特性变化对车辆换挡品质的影响。仿真结果表明粘性扭矩对整车的换挡品质有较为显著的影响,尤其温度变化时更加显著。 The accuracy of the toque model in wet dual-clutch transmission will directly affect the clutch control effect.This paper establishes the torque transfer model of wet dual-clutch transmission including the hydrodynamic torque and asperity torque and studies the influence on the clutch torque characteristic of the ATF temperature and the clutch relative speed.And then,the torque transfer model is embedded into the vehicle model equipped with wet dual clutch transmission and the influence on the shift quality of the torque transfer characteristic is studied.Through the comparison and analysis of simulation results,it is concluded that the hydrodynamic torque has more significant effect on the vehicle’s shift quality,especially with the temperature change.
作者 郝洪涛 严冬 马辉 Hao Hongtao;Yan Dong;Ma Hui(School of Mechanical Engineering,Yinchuan 750021,China;Ningxia Key Laboratory of CAE on Intelligent Equipment,Yinchuan 750021,China)
出处 《传动技术》 2019年第3期14-19,共6页 Drive System Technique
基金 “国家自然科学基金”湿式双离合器预充油及扭矩脉普自适应方法研究(51665048).
关键词 湿式双离合器 扭矩传递特性 粘性扭矩 粗糙扭矩 wet dual clutch torque transfer characteristic hydrodynamic torque asperity torque
  • 相关文献

参考文献1

二级参考文献12

  • 1Natsumeda S, Miyoshi T. Numerical simulation of engagement of paper based wet cutch facing [J]. Journal of Tribology, 1994, 116(2): 232-237.
  • 2Berger E J, Sadeghi F, Krousgrill C M. Finite ele- ment modeling of engagement of rough and grooved wet clutches [J]. Journal of Tribology, 1996, 118 (1) : 137-146.
  • 3Yang Y B, Lam R C, Fujii T. Prediction of torque response during the engagement of wet friction clutch [R]. Michigan: SAE Technical Paper, 1998.
  • 4Gao H, Barber G C, Shillor M. Numerical simulation of engagement of wet clutch with skewed surface roughness[J]. Journal of Tribology, 2002, 124(2) : 305-312.
  • 5Davis C L, Sadeghi F, Krousgrill C M. A simplified approach to modeling thermal effects in wet clutch engagement: analytical and experimental comparison [J]. Journal of Tribology, 2000, 122(1) : 110-118.
  • 6Marklund P, Sahlin F, Larsson R. Modelling and simulation of thermal effects in wet clutches operat- ing under boundary lubrication conditions[J]. Pro- ceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009, 223: 1129-1141.
  • 7Marklund P, Maki R, Larsson R. Thermal influence on torque transfer of wet clutches in limited slip dif- ferential applications [J]. Tribology International, 2007, 40(5): 876-884.
  • 8Mansouri M, Holgerson M, Khonsari M M, et al. Thermal and dynamic characterization of wet clutch engagement with provision for drive torque[J]. Jour- nal of Tribology, 2001, 123(2) : 313-323.
  • 9Jang J Y, Khonsari M M, Maki R. Three-dimension- al thermohydrodynamic analysis of a wet clutch with consideration of grooved friction surfaces[J]. Tribol- ogy International, 2011, 133(1): 0117031-12.
  • 10Patir N, Cheng H S. Application of average flow model to lubrication between rough sliding surface [J]. ASME Journal of Lubrication Technology, 1979, 101: 220-229.

共引文献18

同被引文献19

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部