期刊文献+

基于Gaia建模方法的舰艇抗沉指挥仿真 被引量:1

Simulation of Warship Counter-Flooding Commanding Based on Gaia Modeling Method
下载PDF
导出
摘要 舰艇随时都有可能发生各类舱室破损进水事故。舰艇各级抗沉人员必须快速限制、消除进水,以保证舰艇的不沉。舰艇抗沉的成败不仅取决于船体不沉性能和抗沉设备性能等"硬实力",还取决于各级抗沉人员的反应时间和决策速度等抗沉指挥的软实力。为分析各级抗沉力量对抗沉过程的影响,针对异步并发的抗沉过程,借助于Gaia建模方法,建立抗沉指挥的多智能体模型,并在JADE框架下,构建了抗沉过程仿真分析系统。研究表明,该建模和仿真方法可用于评估分析抗沉指挥的效能大小,找出影响抗沉效能的关键要素,提高舰艇抗沉的组织实施能力。 Various types of flooding accidents caused by compartment damage may occur in warships at any time.Counter-flooding sailors at all levels must quickly restrict and eliminate flooding to ensure the warship does not sink.The success of the warship’s counter-flooding depends not only on the"hard power"of counter-flooding performance of the hull and counter-flooding equipment,but also on the"soft power"of counter-flooding commanding capabilities,such as sailors’reaction time and decision speed.In order to analyze the influence of the damage control forces at all levels on the counter-flooding process,a multi-agent model of counter-flooding commanding is established based on the asynchronous concurrent counter-flooding process by means of GAIA modeling method.And the simulation analysis system of counter-flooding process is established under JADE.The research shows that the modeling and simulation method can be used to evaluate and analyze the effectiveness of the counter-flooding commanding and find out the important elements that affect the counter-flooding efficiency,and thus improve the commanding and implementation ability of warship counter-flooding.
作者 侯岳 王康勃 龚立 HOU Yue;WANG Kangbo;GONG Li(Naval University of Engineering,Power Engineering College;Naval University of Engineering,Simulation Training Center,Wuhan,430033,China)
出处 《船舶工程》 CSCD 北大核心 2021年第S01期388-393,共6页 Ship Engineering
基金 国家自然科学基金(51409255)
关键词 多智能体 舰艇抗沉 多战位训练 Gaia建模 仿真 multi-agent warship counter-flooding multi battle station training Gaia modeling simulation
  • 相关文献

参考文献12

二级参考文献60

共引文献43

同被引文献13

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部