摘要
运用化工流程模拟技术对船舶烟气海水脱硫过程进行模拟.结果表明,在相同的操作条件下,脱硫效率随烟气中SO2体积分数及海水温度的升高而减小,而随填料高度及液气比的增加而增加;脱硫后的海水pH波动较小,通常在3.7~4.3之间;与海水直接喷淋相比,增加预喷淋脱硫效果更好.
The desulfurization process of shipborne flue gas by seawater is simulated by means of chemical process simulation technology.Simulation results show that under the same operating conditions,the desulfurization efficiency decreases with the increases of SO2 concentration in shipborne flue gas and seawater temperature,but increases with the increases of packing height and liquid-gas ratio.The p H value of seawater after desulfurization changes a little,between3.7 and 4.3 usually.Compared with seawater directly spraying,adding pre-spraying has better desulfurization efficiency.
作者
冷洽
崔锦泉
赵超
刘国臣
王廷勇
LENG Qia;CUI Jin-quan;ZHAO Chao;LIU Guo-chen;WANG Ting-yong(SunRui Marine Environment Engineering Company Ltd.,Qingdao 266000,China)
出处
《现代化工》
CAS
CSCD
北大核心
2020年第S01期296-299,共4页
Modern Chemical Industry
关键词
船舶烟气
海水
脱硫
模拟
优化
shipborne flue gas
seawater
desulfurization
simulation
optimization