Numerical Study on Effect of Non-uniform CMAS Penetration on TGO Growth and Interface Stress Behavior of APS TBCs

The penetration of CaO-MgO-Al_(2)O_(3)-SiO_(2)(CMAS)is one of the most significant factors that induce the failure of air-plasma-sprayed thermal barrier coatings(APS TBCs).The direct penetration of CMAS changes the thermal/mechanical properties of the top coat(TC)layer,which affects the thermal mismatch stress behavior and the growth of thermally grown oxide(TGO)at the TC/bond coat(BC)interface,thereby resulting in a more complicated interface stress state.In the present study,a two-dimensional global model of APS TBCs with half of the TC layer penetrated by CMAS is established to investigate the effect of non-uniform CMAS penetration on the interface stress behavior.Subsequently,a local model extracted from the global model is established to investigate the effects of interface morphologies and CMAS penetration depth.The results show that non-uniform CMAS penetration causes non-uniform TGO growth in APS TBCs,which consequently causes the stress behavior to vary along the interface.Furthermore,the CMAS pen-etration depth imposes a significant effect on the TC/TGO interface stress behavior,whereas the interface roughness exerts a prominent effect on the stress level at the BC/TGO interface under CMAS penetration.This study reveals the mechanism associated with the effect of non-uniform CMAS penetration on the interface stress behavior in APS TBCSs.