期刊文献+

BSRF-4W1A形貌成像光束线改造 被引量:4

Upgrade of X-ray imaging beamline 4W1A at BSRF
下载PDF
导出
摘要 从光束线和实验站目前研究工作的需要出发,对BSRF-4W1A光束线进行了改造。改造中,重新确定了光束线的引出参数,设计研制了便于单色光和白光模式转换的固定出口双晶单色器,在理论热分析计算的基础上提出了单色器第一晶体采用顶部冷却的模式。改造后,4W1A光束线的通量在常用的8keV处提高约3.6倍,在同样的通量下能量由现在的8keV可延伸至19.6keV。 According to the demand of beamline and the current research subject, we upgraded the BSRF-4W1A beamline. During the upgrade, the azimuthal angle of 4W1A with respect to the wiggler was redesigned, a new double crystal monochromator with fixed exit was designed, the upside cooling mode of the monochromator’s first crystal was proposed. By ray-tracing calculation, the flux at the commonly used energy 8 keV is promised to increase to 3.6 times, and the energy is promised to expand from 8 keV to 19.6 keV under...
出处 《核技术》 EI CAS CSCD 北大核心 2007年第8期637-641,共5页 Nuclear Techniques
关键词 同步辐射光束线 双晶单色器 晶体冷却方式 Synchrotron radiation Beamline Double-crystal monochromator Cooling mode of crystal
  • 相关文献

参考文献2

  • 1[2]Greaves G N,Bennett R,Duke P J,et al.Nucl Instr Meth,1983,208:139-142
  • 2[4]XIE Yaning,YAN Y,HU T D,et al.Nucl Instr Meth.2001,A 467-468:748-751

同被引文献23

  • 1袁清习,田玉莲,朱佩平,黄万霞,王寯越,胡天斗,姜晓明,吴自玉.用于大尺寸样品的同步辐射硬X射线衍射增强成像方法研究[J].核技术,2004,27(10):725-728. 被引量:8
  • 2袁清习,王寯越,朱佩平,黄万霞,舒航,胡天斗,吴自玉.同步辐射硬X射线衍射增强峰位成像CT研究[J].高能物理与核物理,2005,29(10):1023-1026. 被引量:5
  • 3朱佩平,袁清习,黄万霞,王寯越,舒航,吴自玉,冼鼎昌.衍射增强成像原理[J].物理学报,2006,55(3):1089-1098. 被引量:15
  • 4陈雨,贾全杰,黎刚,王玉柱,薛宪营,姜晓明,陈志华,潘琳,李红艳.衍射增强成像中的折射角与边界可见度[J].高能物理与核物理,2007,31(10):982-989. 被引量:2
  • 5Singhal S C, Kendall K. High-temperature solid oxide fuel cells:fundamentals, design and applications[M]. United Kingdom:Elsevier Science Technology, 2003.
  • 6oussel D, Lichtner A, Jauffres D, et al. Effective transport properties of 3D multi-component microstructures with interface resistance[J]. Computational Materials Science, 2015, 96:277-283. DOI:10.1016/j.commatsci.2014.09.027.
  • 7Hsiao Y C, Selman J R. The degradation of SOFC electrodes[J]. Solid State Ionics, 1997, 98(1-2):33-38. DOI:10.1016/S0167-2738(97)00106-9.
  • 8Simwonis D, Tietz F, Stover D. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells[J]. Solid State Ionics, 2000, 132(3-4):241-251. DOI:10.1016/S0167-2738(00)00650-0.
  • 9Monzon H, Laguna-Bercero M A, Larrea A, et al. Design of industrially scalable microtubular solid oxide fuel cells based on an extruded support[J]. International Journal of Hydrogen Energy, 2014, 39(10):5470-5476. DOI:10.1016/j.ijhydene.2014.01.010.
  • 10Izzo J R, Joshi A S, Grew K N, et al. Nondestructive reconstruction and analysis of SOFC anodes using X-ray computed tomography at sub-50 nm resolution[J]. Journal of the Electrochemical Society, 2008, 155(5):B504-B508. DOI:10.1149/1.2895067.

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部