期刊文献+

1kWα型斯特林发动机的改造及性能测试 被引量:5

MODIFICATION AND PERFORMANCE TEST OF AN 1kW α TYPE STIRLING ENGINE
下载PDF
导出
摘要 对1kWα型太阳能斯特林发动机进行了改造,即用带加热器和微型喷嘴的气体燃烧室取代太阳能吸收 器,建立了试验台,通过试验完成了对气体燃烧室的优化及对励磁系统的调试,最后对这种斯特林发动机的一 些工作特性进行了试验研究。 Through cooperation, University of Science & Technology of China (USTC) and Physical-technical Institute (PTI) of Uzbekistan Academy of Science modified an 1kW α type solar Stirling engine, replaying its solar receiver by a gas combustion chamber with a heater and micro nozzles. The test stand was built, the gas combustion chamber was optimized and the system of excitation was debugged by experiments. Finally the experimental studies of some performances of this kind of Stirling engine were done.
出处 《太阳能学报》 EI CAS CSCD 北大核心 2005年第5期703-707,共5页 Acta Energiae Solaris Sinica
基金 安徽省自然科学基金:(03044203)
关键词 斯特林发动机 气体燃烧室 Stirling engine gas combustion chamber
  • 相关文献

参考文献6

  • 1[1]邹隆清,刘洪硕,邓十洲.斯特林发动机[M].湖南大学出版社,1985.
  • 2[2]Reader G T. Stirling regenerators [J]. Heat Transfer Engineering, 1994, (152): 19-25.
  • 3[3]Jones J D. Inhomogeneity of fluid flow in Stirling engine regenerators[J]. Journal of Engineering for Gas Turbines and Power, Transactions of the ASME, 1989, 111(4) : 595-600.
  • 4[4]Organ, Allan J. The wire mesh regenerator of the Stirling cycle machine [ J ]. International Journal of Heat and Mass Transfer, 1994, 37(16) : 2525-2534.
  • 5[5]Koseki Hidenori, Fujiwara Michio, Sigimoto. Study on stirling engine eombustor[ C]. Proceedings of the Intersociety Energy Conversion Engineering Conference, 1992, ( 5 ):467-476.
  • 6[6]Blank, David A. Power optimization of an endoreversible Stirling cycle with regeneration [ J ]. Energy (Oxford),1994, 19 (1): 125-133.

同被引文献64

  • 1黄护林.太阳能斯特林发动机的性能模拟[J].太阳能学报,2004,25(5):657-662. 被引量:18
  • 2吴惠忠,金东寒,蔡勇,杨建国.瞬时转速监测法在热气机故障诊断上的应用研究[J].柴油机,2006,28(6):38-40. 被引量:5
  • 3Muralidhar K, Suzuki K. Analysis of flow and heat transfer in a regenerator mesh using a non Darcy thermally non-equilibrium model[J]. Int. J. Heat Mass Transfer, 2001, 44(13) : 2 493 - 2 504.
  • 4-uosa M, Kaikko J, Koskelainen L. The impact of heat exchanger fouling on the optimum operation and maintenance of the Stirling Engine [ J ]. Applied Thermal Engineering, 2007,27 (10) :1 671 - 1 676.
  • 5Gu Zhaolin, Sato Haruki, Feng Xiao. Using supercritieal heat recovery process in Stirling engines for high thermal efficiency [ J]. Applied Thermical Engineering, 2001,21 (16) :1 621 - 1 630.
  • 6Bancha Kongtragool, Somchai Wongwises. Performance of low-temperature differential Stirling engines [ J ]. Renewable Energy, 2007, 32 (4): 547-566.
  • 7Boucher J, Lanzetta F, Nika P. Optimization of a dual free piston Stirling engine[ J]. Applied Thermal Engineering, 2007, 27(4) : 802 -811.
  • 8Akio Nishiyama, Hideaki Shimojima, Akira Ishikawa, et al. Fuel and emissions properties of Stirling engine operated with wood powder[J]. Fuel, 2007, 86(15): 2333-2342.
  • 9Kyeong Kyun Kang, Han Seong Cho, Seung Kook Baik, et al. The fuel spray structure of high pressure direct swirl injector for gasoline injection system [ C ]. SAE Paper 2004 - 01 - 0541,2004.
  • 10Costea M, Feidt M. The effect of the overall heat transfer coefficient variation on the optimal distribution of the heat transfer surface conductance or area in a Stirling engine[ J]. Energy Conversion and Management, 1998, 39 (16 -18): 1 753- 1 761.

引证文献5

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部